开云体育

Are the subject modules of any value for HAM use on VHF Analog Quantar repeaters?

I believe that R100 is a suitcase Programmer

Hi. Have anyone make-cp.exe for R100 ?.

Thank you!!! Mick - W7CAT

If your checking through loss of the pass and the notch is accidently too close in frequency it will add more insertion loss. Just make sure the notch is set at the correct offset before measuring

You're welcome, Don. One clarification.... The WACOM series of duplexers generally were provided with variable capacitors with enough range to allow the filter to be configured with the notch either

Don't conflate "diplexer" (those solid metal box fixed-filters that let you put a dualband radio with separate VHF/UHF ports to a single dualband antenna or vice-versa) with a "duplexer" (what you're

Thanks Kevin, This was a diplexer that was on my 443 repeater.? ?I bought the repeater/diplexer as a package years ago. It always had a 25% reflected out of the transmitter.? ? I had been looking

Mike, I found that page on rptrbldr also. Its not much but better than nuthin. Thanks for the bit of history. I didn't know that before. I have one of the Helper millivoltmeters. It sure works

<— 3dB fixed attenuator.

*Hello, Chris Boone WB5ITT!* *Is the service monitor better than a NANO VNA for cavity tuning?* Na quarta-feira, 19 de mar?o de 2025 às 17h16, Chris Boone WB5ITT escreveu:

*Hello,* *What would a 3 dB pad be?*

Its nice to have the Quantar channel selector module when programming a bunch of frequencies to test.

I’m surprised it didn’t work. I have a range 2 in 146.13/73 Works perfect. No mods. Will

First program a number of receive and transmit frequencies so you can write down the current VCO voltage on a table before modification. Then use a proper size tuning tool and try giving the lower

I have a spare R1 RX module. Contact me offlist Ken

Friends, I have a gold colored VHF Range 2 Quantar on my bench.? I am using RVN5002 Version R14.10.00.? My Quantar is currently programmed for frequencies in the mid-150s.? After powerup the RX

If you need help, I'll email you my cell and can walk you thru it with my RSS open [email protected]> wrote:

You don't change it in the service windows. In your last picture where it shows messages, click on edit and then if I recall station... That's where you change frequency, etc. [email protected]>

I have a helper rf voltmeter that I've picked up at a ham swapmeet for $5.00..still works but needs calibration.