开云体育

<--- Finally got my hands on a used Acer V196WL monitor this morning... VOILA! I'll add this info and the "tried and tested" monitor info on the cable drawing and post later. Thanks, Jared and

In my years of programming Kenwood radios from 450 down to 440, usually the only thing that requires tweaking is the VCOs. They'll take the frequencies. I ran a TK7180 and 8180 mobile and they worked

Hi Chad, I have an 8360 that I use as a UHF base station radio in my shack. The CPS complains when I program "unsupported" frequencies, but so far I haven't had issue as long as I stay as high as

Mike So, do you still want a 7/8" NF connector for Annular heliax cable? Solid center core, non-solder, slip on center pin. The ?" cable center pins are soldered on. Please LMK.

Turns out my 4 year old i7 desktop is just too fast, even in a virtual machine. Oracle's VirtualBox has a mechanism to slow down the virtual CPU, it's called Execution Cap. I set it to 25%, RSS works

It's running on a remote mini PC and Win11 is bloatware. ( I do run it on my workbench computer at my shop under Win11, Win7 compatibility as you point out) Ken

Quantar? I run it straight on Win 10 64 bit using win 7 compability...no issues at all [email protected]> wrote:

I'm running R14.10.00 in a Win7 VM under Proxmox (at a remote site) with zero issues Ken ------------------------------------------------------------------------------ President and CTO - Arcom

I use XP Professional 32 bit, inside VMware workstation 17 player (free), on a Windows 11 machine with a usb to serial adapter. Sometimes I get a "framing error" when starting a transfer, but the

I know with the XTS3000 RSS the trick to making that work was the Virtual machine has to be running a single core 32 bit processor. [email protected]> wrote:

The answer is: MX-COM CTCSS PCB. GOOGLE MX-COM. Joel W6BQD [email protected]> wrote:

I use Oracle VMBox .. win 10 and loaded XP SP3 in the VM....works fine on my MTR2000s Chris WB5ITT [email protected]> wrote:

Ah, good point. MTR2000...rx, tx, & gnd lines only. [email protected]> wrote:

You didn't mention the radio model, it makes a difference. Earlier RSS for earlier models suffered from timing loops to compensate for a lack of suitable data buffering back then but nearly all

if you need more i have about 200 pcs new in box , cr1070nm all made for comscope/? cell reach 7/8 to male type n all new in boxes?

I use Dosbox and windows 7, I also have a vmare win 3.11, win XP and win 2k.I have been able to read and write to just about any radio.I also use a "real' serial port card that has 2 port and a

Hello, I have recently got a Helper Instruments PS 250. Does anyone have a manual or schematic for the Helper Instruments PS 250. thanks 73's Brian w7fdd

Hi Folks. Has anyone used RSS in a virtual machine? I've got RSS 3.03.03, running in a 32bit WinXP under Oracle VirtualBox, inside Win10. I can read the station, it gets to 100% and then hangs,

That's not gonna cause problems at all...<eye roll>

146.6875 out / 146.0875 Actually,taking a closer look. 146.6875 / .0125 = 11735.0 146.0875 / .0125 = 11687.0 Are even integers, so a 12.5 KHz? (and 6.25 or 2.5 KHz) radio will do it. Still some