¿ªÔÆÌåÓý

  1. Repeater-Builder
  2. Messages
Expanded Topics Messages Polls
Date
Re: Micor base station cabinets available

 

i have a uhf mobile ,i dont need?

Steve Flory W9KOP

sflory@...

"I like climbing towers because people look up to me"

-----Original Message-----
From: <[email protected]>
Sent: Nov 9, 2022 11:17 AM
To: <[email protected]>
Subject: Re: [repeater-builder] Micor base station cabinets available

?

I could use Micor parts.? I maintain one UHF Micor repeater and two VHF Micor repeaters (all unified chassis models)?for a club in Harrison County, Iowa, across the river and a little north of Omaha.? I don't need any cabinets.

I'm just trying to keep them running!

John
AB0VX

?
Re: Micor base station cabinets available

 

I have a VHF Quarter Kilowatt Micor rptr..no tubes or HV PS but otherwise complete

Chris WB5ITT

On Wed, Nov 9, 2022, 11:17 AM John P. <ab0vx1@...> wrote:
I could use Micor parts.? I maintain one UHF Micor repeater and two VHF Micor repeaters (all unified chassis models)?for a club in Harrison County, Iowa, across the river and a little north of Omaha.? I don't need any cabinets.

I'm just trying to keep them running!

John
AB0VX

Re: Micor base station cabinets available

 

I could use Micor parts.? I maintain one UHF Micor repeater and two VHF Micor repeaters (all unified chassis models)?for a club in Harrison County, Iowa, across the river and a little north of Omaha.? I don't need any cabinets.

I'm just trying to keep them running!

John
AB0VX
Re: *** QUARTZLAB / KLOVE ***

 

Great news!!!

Chris WB5ITT?

On Wed, Nov 9, 2022, 8:34 AM DougH via <specialq.que=[email protected]> wrote:
General advisory.

For those who have been trying to get in touch with KLOVE there was a
fault in the online form which prevented any message actually getting
through them.

The problem has now been fixed.

Best regards,
Doug - GM7SVK
*** QUARTZLAB / KLOVE ***

DougH
 

General advisory.

For those who have been trying to get in touch with KLOVE there was a fault in the online form which prevented any message actually getting through them.

The problem has now been fixed.

Best regards,
Doug - GM7SVK
Up for sale on Hamradioauctions.com

 

A friend of mine, N5BZM, started up a new ham radio auction site for those who are ticked off at the big "Bay" site for their fees, etc..and it's now live.?

is the site

I am posting the following equipment:

1 DB products VHF BPBR 8-inch cavities duplexer
1 Telewave UHF BPBR duplexer
1 TPL UHF repeater amplifier
1 DB222 VHF antenna
1 SGC SG500 500 watt HF solid state amplifier (yeah I know it's not repeater or VHF but what the heck lol)
and more to come.

The HF amp is already posted and the rest of the equipment will be posted today

Good day!?

Chris
WB5ITT
Trustee W5APX?
Re: for sale items ok in this group?

 

¿ªÔÆÌåÓý

Yes -

Kevin W3KKC




On 11/9/2022 7:42 AM, Jamie WW3S wrote:

Is it ok to post repeater related items for sale in this group? Our club is looking to sell a new CAT-1000, complete with DVR and Audio delay board

Re: Sinclair Q2330E Double Rejection Notch Oddity

 

On 11/8/2022 9:14 PM, Jared Smudde wrote:
I was tuning up the transmit/low pass on my Sinclair Q2330E and came across an oddity when tuning the rejection notches on the low/transmit pass. It looks like there are 2 notches there, about 70Khz apart from each other. No matter how I adjust the notch caps, the double notches move together. The receive side tunes up perfectly and has one deep notch.
What would cause this and what is a possible fix?
My first thought would be cable lengths maybe? If this was tuned further up in the band, the cables may be a bit short.
FS: Motorola S1327A and S1327B manuals

 

For Sale:? Original manual for Motorola S1327B in good shape, also comb bound copy of manual for S1327A.? Either for $20.00 shipped in the US.? Contact me at my call at hotmail? dot com.? Thanks for looking, Noel, K8NB
for sale items ok in this group?

 

Is it ok to post repeater related items for sale in this group? Our club is looking to sell a new CAT-1000, complete with DVR and Audio delay board
Re: Sanity Check On Bandpass Duplexer Tuning

 

On 11/8/2022 7:11 PM, Jared Smudde wrote:
It¡¯s my Sinclair Q2330e
Oh - well - okay - that's not a bandpass duplexer.
Re: 6' base station cabinet needed in the Ozarks

 

¿ªÔÆÌåÓý

Jim: these are not 6 ft they are a little shorter.? E-mail me direct if you are interested.

?

John Lock

KF0M

Kf0m@...

?

From: [email protected] <[email protected]> On Behalf Of Jim W7RY via groups.io
Sent: Tuesday, November 8, 2022 3:22 PM
To: [email protected]
Subject: Re: [repeater-builder]6' base station cabinet needed in the Ozarks

?

I'm looking for an upright (6 foot) GE or Motorola cabinet here in the Ozarks.

Thanks, 73, Jim W7RY

On 11/8/2022 3:16 PM, kf0m wrote:

I have at least three empty Micor UHF base station cabinets? available in Wichita KS if someone wants to come haul them off.? They have been collecting dust too long and I need the space for other junk.

?

John Lock

KF0M

Kf0m@...

?

?

--
Thanks and 73, Jim W7RY
Re: Micor base station cabinets available

 

¿ªÔÆÌåÓý

I have around 25-35 cabinets mostly the 6 foot ones. Most are almost new in a storage facility in Omaha along with other facilities loaded with brand new Micor parts still in boxes.?

All heading to the dumpster around the first quarter of 2023.?

Get your orders in now. I will post up here the exact dates they will be closed.?

Also have Glenayre and other style cabinets in Michigan and Ohio areas.?


Ken.?



On Nov 8, 2022, at 19:06, Chris Boone <setxtelecom@...> wrote:

?
Wish I could but Kansas is a little too far drive for me..

Chris WB5ITT?

On Tue, Nov 8, 2022, 3:17 PM kf0m <kf0m_list@...> wrote:

I have at least three empty Micor UHF base station cabinets? available in Wichita KS if someone wants to come haul them off.? They have been collecting dust too long and I need the space for other junk.

?

John Lock

KF0M

Kf0m@...

?
Re: Sanity Check On Bandpass Duplexer Tuning

 

It¡¯s my Sinclair Q2330e
Re: Micor base station cabinets available

 

Wish I could but Kansas is a little too far drive for me..

Chris WB5ITT?

On Tue, Nov 8, 2022, 3:17 PM kf0m <kf0m_list@...> wrote:

I have at least three empty Micor UHF base station cabinets? available in Wichita KS if someone wants to come haul them off.? They have been collecting dust too long and I need the space for other junk.

?

John Lock

KF0M

Kf0m@...

?
Re: Occupied bandwidth - (was Windows 7 config)

 

Touching again on OBW before moving on, in the other discussion I asked Burt to explain the procedure he uses to measure occupied bandwidth.

Burt replied:? "For occupied bandwidth measurements I use an Anritsu MS2721B spectrum analyzer.? I set the span to 100 kHz, the RBW (Resolution Bandwidth) to 100 Hz, and VBW (Video Bandwidth) to 30 kHz, and also use peak store.? With the repeater in use that has a mix of fully quieting and noisy signals I let the analyzer sweep for 10 minutes or longer."
?
The industry procedure uses the same 100 Hz RBW and since the goal of the OBW test pattern is to simulate normal modulation, either should produce comparable results
?
Once the trace is acquired most modern analyzers will compute the 99% OBW value at the touch of a button.? This will provide a baseline record for comparison to industry expectations and for comparison when experimenting with different transmit audio processing.
Re: Micor base station cabinets available

 

I also have a Micor CompaStation rack available as well as a 6' full size Motorola rack (pics available). Both 2135 keyed of course

Located between Portland and Salem Orygun

Ken



At 01:16 PM 11/8/2022, you wrote:

I have at least three empty Micor UHF base station cabinets? available in Wichita KS if someone wants to come haul them off.? They have been collecting dust too long and I need the space for other junk.

?

John Lock

KF0M

Kf0m@...

?
------------------------------------------------------------------------------
President and CTO - Arcom Controllers
Makers of repeater controllers and accessories
Phone: (503) 678 6182
Authorized Dealers for Kenwood and Telewave.
We offer complete turn-key repeater packages!
"We don't just make 'em. We use 'em!"
[]

Re: Quantar Audio Interfacing and Testing

 

In order to keep related material in one topic, here's a repost.
?
The Quantar Instruction Manual, 68P81095E05-B, shows a number of interface configurations.? Typically, transmit audio is input through wireline #1.
This is an excellent choice.? It is a transformer isolated, balanced input that can be connected to balanced or unbalanced devices.? It comes preset to 600-ohm impedance
but can be changed to other values, including high impedance, with configuration jumpers.? A nominal level of -10 dBm will result in 60% deviation,
?
When using wireline #1 as a transmit input, PTT is configured with a wildcard command.?
Use of wirelines and wildcard functions requires that the station be equipped with a wireline interface board.? If you have a Quantar without a wireline board, your only choice for
I/O is the 6809/MRTI interface.
?
Also, since low frequency audio is not passed through the wireline input, tone coded squelch [PL/DPL] can either be encoded by the station, or - if it is desired to generate this externally?input through J17-5 which must then be configured for Aux PL Audio.
The manual is somewhat unclear about the use of J17-5 so I did some research, and I prepared the attached document for clarification.
?
Finally, there is the Gen TX data +/- input which is intended for simulcast applications.? This input should be used with caution and requires the user to provide all transmit audio processing.
With this comes the risk of unacceptable transmit bandwidth.
?
Also make sure that the reference modulation compensation is correctly aligned to enure distortion free low frequency modulation.

USE OF THE QUANTAR AUX-TX AUDIO INPUT.pdf
USE OF THE QUANTAR AUX-TX AUDIO INPUT.pdf

Re: 6' base station cabinet needed in the Ozarks

Jim W7RY
 

¿ªÔÆÌåÓý

I'm looking for an upright (6 foot) GE or Motorola cabinet here in the Ozarks.

Thanks, 73, Jim W7RY


On 11/8/2022 3:16 PM, kf0m wrote:

I have at least three empty Micor UHF base station cabinets? available in Wichita KS if someone wants to come haul them off.? They have been collecting dust too long and I need the space for other junk.

?

John Lock

KF0M

Kf0m@...

?


--
Thanks and 73, Jim W7RY
Micor base station cabinets available

 

¿ªÔÆÌåÓý

I have at least three empty Micor UHF base station cabinets? available in Wichita KS if someone wants to come haul them off.? They have been collecting dust too long and I need the space for other junk.

?

John Lock

KF0M

Kf0m@...

?
19861 - 19880 of 215213