开云体育

Don't think so, he ID'ed the hand held station not the "base" station if what ya say is true a repeater does not need to ID either

Im looking for Mods on the Midland 13-509's ( aka Cobra 200, Clegg fm-76 ) . I know someone sent me the Sq. "mod fix" for it, but I had a HDD crash and lost it! ( yeah, my 90 day warranty on the

When you give your callsign over your HT, you just IDed your remote base. Chuck Kelsey WB2EDV ---------------------------------------------

In a message dated 4/26/99 12:16:43 AM Eastern Daylight Time, rlee@... writes: << If you listen to a broadcast station >> Now you're talking about two different sets of FCC rules entirely

Actually it is pretty simple, if it xmits ya gotta ID it Dick WA3USH "It happens, just deal with it" The people will not understand the importance of the Second Amendment until it is too late." --

The 15.8v is with no load. Putting a 20amp load on it will only drop the voltage to ~15.0 volts. Under a mild load (2-5amps) the voltage stays around 15.6-.7 volts which seems a bit high to power

In a message dated 4/25/99 10:40:43 PM Eastern Daylight Time, kelsey@... writes: << You mean he has to give his callsign twice? Remember, he is talking on his own station, not someone else's.

In a message dated 4/25/99 10:00:51 PM Eastern Daylight Time, rlee@... writes: << Don't think so, he ID'ed the hand held station not the "base" station if what ya say is true a repeater does not

I would like to operate a remoyte base from my house and I am confused as to the fcc requirements HOW or IF I need t ID the remote base. Can anyone help me? I am using a dual band mobile to remote

I just bought three samlex supplies from tech America when they had them on sale they were rated for 23 amps continuos but when I tried to run a UHF Maratrac mobile off it it would only make about 90

Hi all, Does anyone have a copy of the manual for a Connect Systems CS-8000 Interconnect that I could purchase or get a photocopy of? Thanks, Chris ku4dd

Andrew, The regulator board you are checking is probably the aux reg board for the "radio" (the rx and exciter). It should read 13.9 VDC. The high current is rated for 13.1 to 16.3 VDC, depending on

Hello, I'm looking for any information on a Motorola TPN1191A power supply (36amp). Either something is wrong with the regulation or it requires some type of external feedback. The main outputs stay

Thanks to all who responded on my MSR2000 base to repeater conversion questions ... Kevin on this list, recommended the Racom model 700 CWID. I called the Racom folks and the were *VERY* helpful and

I've been using the DB 420-B, 8 element exposed folded diapole array for working area UHF repeaters - with no problems. It replaced a Celwave PD 455-6 heavy duty fiberglass stick (also in the 450 to

In a message dated 4/25/99 12:33:11 PM Eastern Daylight Time, litz@... writes: << >Hi Guys: I am working on putting a repeater together with a few other >folks help, and I am in need of a

I have used Samlex switching supplies on everything, HF to UHF and have had no problems with noise. Demos KR4US

In a message dated 4/25/1999 9:25:00 AM Eastern Daylight Time, jackj4@... writes: << Hi Mike, Have used Duracom and Astron switching supplies on VHF & UHF repeaters and paging systems for about

Hi All, I recently purchased a Switching power supply. It was rated at considerably more amperage then most of the REGULAR power supplies I had seen, and was more affordable, so I had to buy it. I

HI All, I have been looking for an operators/service manual for the Cushman service manula, model number CE-3, since Dayton of last year with no luck. If anyh one knows of a place whrere I can get