|
Re: GE phen.programable radios/info
kevin do you have any information on putting together a remote base.
I just never did that and i'am think about doing it. I think it would be fun
to do. thank you bill brown-----k5py.
By
bill <k5py@...>
·
#170
·
|
|
GE Century II uhf mobile
Brent,
Say, if you get a schematic, could I get a copy too? I've got one laying
around but I've never done anything with it for the same reason...
73
Tracy
By
Tracy585@...
·
#176
·
|
|
Re: GE phen.programable radios/info
"D.J.H." wrote:
Ok, I am not sure why you are only seeing message headers when html is
present. ??????
You can upgrade your Explorer to version 4.something for free
By
Kevin K. Custer W3KKC <kuggie@...>
·
#169
·
|
|
Re: GE phen.programable radios/info
Bill,
Tracy, K0DOE, here. I built a dual band remote using a Kenwood TW-4000A. Works
great! I used the controller momentary outputs to 'strobe' (ground) the mic
up/down switch for frequency change.
By
Tracy585@...
·
#173
·
|
|
Re: 222MHZ Micor repeater
In a message dated 2/15/99 9:47:10 PM Eastern Standard Time, kuggie@...
writes:
<< ve no experience with that exciter. I use the TLD 8732A
As far as the deviation goes, you should not have to
By
NE2E@...
·
#171
·
|
|
Re: GE phen.programable radios/info
Yes i can recive attachments,using microsoft exploder 3.02 i believe.
Doug
----------
By
D.J.H. <ve6zh@...>
·
#168
·
|
|
Welcome to the list.
Bill, K5PY wrote:
Hello Bill, and other recent subscribers.
Welcome to the list. A detailed explanation of the purpose and use
of this list is available
By
Kevin K. Custer W3KKC <kuggie@...>
·
#167
·
|
|
(No subject)
By
bill <k5py@...>
·
#166
·
|
|
Alinco SR4D Repeater controller
<html>
<body>
I am looking for anyone who has experience with the SR4D
repeater controller.
I am using one and I have been experiencing audio problems during the voice mail mode, and it also mutes the
By
S.Turner <n2kej@...>
·
#165
·
|
|
Large Heat Shrink Tubing
Hello All,
I recently received several requests from people on the list
wanting to obtain the large heat shrink I use to seal the Comet
and Diamond fiberglass antenna joints with. This stuff is
By
Kevin K. Custer W3KKC <kuggie@...>
·
#164
·
|
|
Re: X-500HNA
Ralph Hogan wrote:
I'll look up a retail vendor at work tomorrow (if I don't forget) If I don't
reply in the next couple of days, please email again.
I can send some to you.....although I would
By
Kevin K. Custer W3KKC <kuggie@...>
·
#163
·
|
|
Re: GE phen.programable radios/info
"D.J.H." wrote:
Can you receive html and attachments through your email server. Does the
browser you are using allow this?
Kevin
By
Kevin K. Custer W3KKC <kuggie@...>
·
#162
·
|
|
Re: Advice
JHowel@... wrote:
I'll build the NHRC4 for you.
By
Kevin K. Custer W3KKC <kuggie@...>
·
#161
·
|
|
Re: Advice
hmm 3 cavities may should work ok 2 on tx one on Rx
might be able to get about 60 db isolation 6 cavities 3 rx 3 tx u could obtain
100db isolation which will greatly improve the repeater
By
Brent DeSalvo KF4TNP <Bug1@...>
·
#159
·
|
|
Re: X-500HNA
We had a Diamond antenna (X-500HNA?)
machine for about two years. The antenna
eventually failed due to water ingress. I now heat shrink the joints before
installing this style antenna. I have
By
Ralph Hogan <rhogan@...>
·
#160
·
|
|
Re: GE phen.programable radios/info
Just fine!!
Doug
----------
----------------------------------------------------------
By
D.J.H. <ve6zh@...>
·
#158
·
|
|
Re: Advice
mch wrote:
Hi Joe,
Dan and I have a few of the Comet and Diamond antennas in duplex service.
Some are in crossband duplex, and some are in same band duplex with all
bands duplexed. Some are a
By
Kevin K. Custer W3KKC <kuggie@...>
·
#157
·
|
|
Re: Advice
Kevin K. Custer W3KKC wrote:
Kevin,
Do you (or anyone else) have any experience with the G6-270 (?) (the
dual-band G6) or the Comet antennas? This would be for relatively low
power duplex links. I
By
Joe M.
·
#153
·
|
|
Everyone else getting everything OK?
"D.J.H." wrote:
I am not seeing a problem? Anyone else having problems?
This message was sent as a text only file (not html)
Kevin
By
Kevin K. Custer W3KKC <kuggie@...>
·
#154
·
|
|
Re: GE phen.programable radios/info
"D.J.H." wrote:
Can you read this text ok?
Kevin
"D.J.H." wrote:
By
Kevin K. Custer W3KKC <kuggie@...>
·
#155
·
|