开云体育

Are they solely wireless with no hard wiring? And they're battery powered I assume? Ken

if there is interet or wifi at the site...the little wyze cam v3 is awesome. We use them at mulitple sites and they work great and you can give access to multiple users if you want. Incredibly easy to

Looking to swap a brand new ics control quantar 1x for the northcomm quantar ecm and program cable. I'm looking for a more simple plug and play solution than something I need to jump through all

Hi Chris perfect timing we are in need of the isocoupler to get our vhf repeater back on air If still available contact info ldanna. At comcast dot net regards larry wa3kok

apparently if you put something on the internet it stays on the internet ;-) I found this we are going to try it soon: The 403-435 MHz station is limited by RSS, but apparently the exciter and power

To be correct, its a 403 - 435 version. Here in Belgium the ham freq is 430 - 440 . Apparently there is a procedure to modify the .EXE of the programming software in a HEX editor so that you can get

No, i can not go higher than 430 (eu version). Manu - ON7FQ

Low band? 420 to 470? You just program it using RSS. No issues I have 2 such on 440 ham Chris WB5ITT [email protected]> wrote:

Hi, I own a MTR2000 UHF Low Band High Power. Apparently there is a way to get this low band within the ham band (430-440). I once saw a description on the repeater-builder website but can't find

Send me your rpt.conf in private. Je vais regarder ?a Richard VE2DJE [email protected]> a écrit :

I forgot to say that the 6881091C63 Detailed Service Manual covers low band, high band and UHF... everything but the narrowband-only "200" and "700" MHz CDMs.?? They have their own manual. Mike

The repeater-builder web site has BOTH the B and C versions of the 6881091C63 Detailed Service Manual for free download.?? Look here:

VHF and UHF. Manual 6881091C63-B, Chapter 7, available on the web site. All lowband CDM's are rated for 60 watts. --- Jeff WN3A

* I noted the longest leg of the loop is about 3.25" from the solder to first bend. Does any of this help with identification? _._,_._,_ Well, maybe can read what’s written better than I can by

Hello, My previous email was in error! The VHF CDM-1250 is rated for 45W. The low band 1250 probably higher wattage. Did you look on the web for the model # of radio. Usually specs are

Hello, The Motorola CDM-1250 is rated for 45 Watts. 73 de Tim AE7TH

Hi to All, I just bought a nice Motorola CDM-1250 Low-Band modified for 6 Meter Ham Band. But I am looking for the Service manual and I can only find the manual for VHF and UHF. The radio

Yes, a 6 foot long male to female six pin mini din plug cord. Chad Nelson WI9HF/WRPL979 Janesville Wisconsin 608-754-8671 Send from my spectrum iPhone 16.

Jeff, I cannot find any labels anywhere on my Duplexers, so I removed the low pass loop housing and took a picture of the bottom of it. ?See attached.? Based on something I read on

Hello everyone, i am trying to programm my TB7100 Vhf to worked with Scott RB-USB RIM "Lite". Anyone has done it and if so maybe he could share the file of this repeater or just a picture where i