开云体育

anyone have one to share? What value for the piston trimmers for the 2 meter band?

we bought the cable, but dont believe it works.....and I think we are going to keep the software for now.

Do you have the cable and the software

Is the audio available on the control board, just not brought out to the accessory connector? Bob NO6B

Band Reject only. See the attached doc. 73, Joe, K1ike

Thanks all. I'm trying to source or buils an original cable set. I have a chassis and housing, just missing the cables. Trying to make a complete repeater. Jeremy

No difference as far as interfacing to an external controller. The question was regarding a TKR-D710/D810, which is a DMR/Analog repeater. The NXR-710/810 are NextEdge/Analog repeaters. Kenwood made

They should swoop in and tax all those garage sales around me. Some folks make a living by it it seems. Meanwhile Jeff Bozo can write off his rocket hobby. -- The Real RFI-EMI-GUY

NXR can do NXDN digital modulation. If you mean the TKR-D810, it does DMR. Why they didn't bring audio out the rear connector on the D810 is beyond me. They would, because of TDMA, have to have added

I find it very distasteful to pay tax on something I'm taking a loss on from its original purchase price plus the state is collecting sales tax via PayPal or other service.? Who keeps paperwork on

Curious what is the difference between an nxr810 and a tkr810. I would need audio in and out on the db25 as the 850 does.

Thanks Ken. wrote:

John It only works with the KPG software or to upload new firmware using their Fpro software. On a side note, you can use the DB25 on the back panel of the NXR for your serial connection when using

Does the serial port interface on a Kenwood NXR-710 (the one through the mic plug) only function with the companion programming software KPG-129D?or can one do anything with a simple terminal

Ken, Thanks for the reply - I know you would know if anyone. Appreciate it. Off they go! Chris -- Chris Baldwin, CETSr. (KF6AJM) Trustee - MetroNET Cal. Intertie (KB3PX)

New, never installed, local club bought it 10 years ago, and project never got off the ground. no box, but new, from the factory. Includes the rack mount enclosure, DR-1000 DVR, DL-1000C audio delay

Hamradioauctions.com is the site

Yep part of the 68,000 IRS agents they hired and millions of 9mm ammo they bought to go after ham operators, used car parts and grandma's crafts. But they are not going after people who make less than

The GM300 head has two connectors, like the R1225 head. Yes, the volume control and microphone jack of the GM300 head works on an R1225 (the speaker works as well as long as the 15-to-16 jumper on the

Any 40-50 meg micor comps stations?? Mistakes compliments of Siri voice translation