开云体育

unscubscribe

Ken, Don't know about that specific programmer, but many low cost (and even some not so low cost) programmers don't know about differences in manufactuer specific programming algorythms. If your

Hi All, I am looking to purchase a manual, or copy of a service manual for a UHF Micor base/repeater station. The unit currently contains the low power, 50 watt pa. I don't have the model number here,

I am trying to program a set of EPROM's for the ACC RC850 controller. I have downloaded the data from Link and I also have read in from an Original set of version 3.8 EPROM's from a working

With regards to your TXRX duplexer...which by the way is one of the finest made.Contact Bob at TXRX for tech support.He can mail you some info on how to do it. E-mail him at; bobl@...

It's working. I've got a question. What do you do with master 2 on 39.5 meg. this is a tripler pa instead of going to 6mtrs. what about going down to 10 mtrs. Just a question to ponder. I enjoy

Hi All, I baught a TXRX duplexer at Dayton this year, and I would like to tune theunit up. I have seen all the tuneup info on the net, however, the TXRX has some sort of adjustment on the top,

This is a test to see if i dropped off the list......................... Bill WA4YNZ Mike Hamann wrote:

We have a single DECIBEL, DB-812-F-X (special order) antenna for sale! The spec's. are: 806-901 Mhz, 11.5 dBi gain, brass elements, corporate feed structure. WEIGHT: @ 55 Lbs. in EXCELLENT condition,

On the label is the repeater freq it used: "224.86 / 223.26 " I need a manual for it. If anyone has one around they would be willing to copy ( Ill pay for copies and postage if you wish). Please email

I have a Wiltron SiteMaters frequency domain reflectometer. What I would do is connect it up and shake the antenna, or sway it back and forth to see if the return loss varies with vibration. Kind of

Install it on a temporary pole (a few feet off the ground) and hook your repeater to it. While receiving a weak signal "bump" the antenna and notice if you hear a static or noisy "popping" on the

yeah, maybe if the goverment was buying it. Otherwise somewhere around 600 bucks or so new...in the box. Better check it out and make sure it isnt broken inside before you put it up , only to find it

try resetting the microprocessor: press and hold MR while turning on power or press and hold VFO/M and M.IN and turn on power. ---------- our

Hi Chris, If that antenna is a model PD-220, it is a 2M not a 220 unit and if it works(checks out on a SWR meter on 2M) you have an antenna worth close to a grand. Use it in good health. vy 73 - Bob -

Did that too but will try it again....tnx for the reply. Frustrated Swap Meet Dummy

I need some info on an antenna.. its a Phelps Dodge 220mhz antenna. its a big fiberglass antenna ( somewhere around 20') My guess is that its a Station Master antenna.. Although I have no information

Looking for idea's re: a recently purchased TM421A which I hope to use on our local repeater for a remote. The former owner forgot to tell me that it wouldn't transmit above 445 Mhz. The display

In a message dated 5/23/1999 11:35:24 PM Eastern Daylight Time, wa4qkc@... writes: << yeah, maybe if the goverment was buying it. Otherwise somewhere around 600 bucks or so new...in the box.