开云体育

Hi all, Does anyone have a copy of the manual for a Connect Systems CS-8000 Interconnect that I could purchase or get a photocopy of? Thanks, Chris ku4dd

Andrew, The regulator board you are checking is probably the aux reg board for the "radio" (the rx and exciter). It should read 13.9 VDC. The high current is rated for 13.1 to 16.3 VDC, depending

Hello, I'm looking for any information on a Motorola TPN1191A power supply (36amp). Either something is wrong with the regulation or it requires some type of external feedback. The main

Thanks to all who responded on my MSR2000 base to repeater conversion questions ... Kevin on this list, recommended the Racom model 700 CWID. I called the Racom folks and the were *VERY* helpful and

I've been using the DB 420-B, 8 element exposed folded diapole array for working area UHF repeaters - with no problems. It replaced a Celwave PD 455-6 heavy duty fiberglass stick (also in the 450 to

In a message dated 4/25/99 12:33:11 PM Eastern Daylight Time, litz@... writes: << >Hi Guys: I am working on putting a repeater together with a few other >folks help, and I am in need of a

I have used Samlex switching supplies on everything, HF to UHF and have had no problems with noise. Demos KR4US

In a message dated 4/25/1999 9:25:00 AM Eastern Daylight Time, jackj4@... writes: << Hi Mike, Have used Duracom and Astron switching supplies on VHF & UHF repeaters and paging systems for

Hi All, I recently purchased a Switching power supply. It was rated at considerably more amperage then most of the REGULAR power supplies I had seen, and was more affordable, so I had to

HI All, I have been looking for an operators/service manual for the Cushman service manula, model number CE-3, since Dayton of last year with no luck. If anyh one knows of a place whrere I

Hi All, I am looking for the tuning procedure for the transmitter in the MX series of Motorola portables. I have a service manual, and I can't seem to find the transmitter alignment

I agree regarding the Decibel Products folded dipole being a great antenna. Yes they dont have one designed for 440 but the 450-470 version works fine. I've been running the 8 folded dipole DB

Hi Mike, Have used Duracom and Astron switching supplies on VHF & UHF repeaters and paging systems for about 6 years with NO problems. They run much cooler and do a great job. You will not have any

Hi Guys: I am working on putting a repeater together with a few other folks help, and I am in need of a reccomendation of a good UHF repeater antenna. I have seen a few of the DB products antennas

Hey there! Many well thought out reply posts to my query "what to coat Aluminum (metal) antennas with". Condensing the solutions offered: 1.) (solvent-thinned) rubberized "tool

The decibel products folded dipole antennas cut for the 450 to 470 MHz range work just perfectly in the 440-450 ham band. My repeater is living proof. Others in my area are using the same thing.

Nothing like getting it right from the horses mouth....<grin> (sorry Allan)

Thanks very much Kevin, seems like some people just don't get it! "Kevin K. Custer W3KKC" wrote:

at which address does the data go into the prom.... is there an address for each code segemnt for each indivadual channel I just need to decifer the sequence inorder to program. I don't have the

My apology to the list for the FWD E-Mail: Congress. I intended to send it to only 2 groups, but a small typo sent it to ALL groups. I have taken the necessary measures to prevent this problem