开云体育

* I appreciate the write up Jeff! I’ll tune them up based on this and see if anything changes. Kevin sent me a private email which reminded me you had a Q2330E (six-cavity). For some reason I was

Yup - CloneZilla is not persnickety about which OS is on which drive. Its partition to partition function may be a bit tricky, but drive to drive is excellent and fast.? Just saved my Server 2016

Measure test cable losses by replacing the tee with a female-female barrel, then correct your insertion loss measurements based on that value when you’re adjusting the coupling with the tee

yes they are similar to an HT-220. These are on 171.210 Mhz. For further info please Mail me direct at: My call(at)rac.ca 73 John VE3AMZ Sent: Sunday, October 30, 2022 5:26 PM To:

I appreciate the write up Jeff! I’ll tune them up based on this and see if anything changes. I know I have each cavity currently set to 0.35db IL. I have an Amphenol Tee connector I’m using. Now,

Looking for information. I have a Motorola CDM1250 and all the programming software and cable.? I am looking at buying the RIM-Maxtrac.? Is this plug and play or what do I have to do. I also have a

I'll have to see if I still have a copy saved on my portable drives or on the server HD [email protected]> wrote:

Yes on Macrium, it requires you to have a licensed windows so that it borrows the PE boot from that installation to build the boot disk.? As long as the hardware in the computer will boot and be able

Anyone have a set of HKN9032A R1225 chassis to control head ribbon cables they would be willing to sell? Jeremy K1LFK

* So I guess my question is, at what tuning stage do I have to rotate the loops to set insertion loss. That’s the very first thing you do. From the factory, the loops would have been adjusted such

Sorry to hear about your brother. Are these some older black radios with similar form factor to the HT220 radio? Used same batteries and chargers. I worked on some like that back in the 1980's that

This is how well engineered Enterprise systems and computer manufacturers do it.? A lot of details go into that. If you never had a problem cloning from that master drive to different machines, you

Marcium is a good one, but won't run on below Windows XP. Marcium is what I use, and then for OS's older, I use Ghost 8. For the OP, what was the issue with using Ghost 8 anyway? It can boot into DOS

https://northcommtechnologies.com/products/quantar-external-control-module The above controller is a simple addition to the QUANTAR and should do exactly what you asked about. Burt, K6OQK

So I guess my question is, at what tuning stage do I have to rotate the loops to set insertion loss. After I adjust the individual cavities for best return loss or after I cable them all together and

There was some info on here about RF Harris portables. I have two RF-2800 VHF portables that have brand new batteries and belonged to my brother. He passed away on Friday so these units are surplus.

When I was working for CenterPoint Energy doing IT and telecom work, I cloned several PCs using a software package that rewrote the system ID on the hard drives to a random number. Then I used Ghost

The part about moving the installation from a croaked laptop to a new laptop is not a trivial thing. Different machines even identical models will have different serial numbers on hardware unless the

Use clonezilla. Not easy to use, but works perfectly. You must read all of the prompts. 73, Jim W7RY

Jeff, I know where one may be. I've been trying to get back to the storage shed and slowly sift through the pile. What I recall finding was in fairly good condition and I believe had a chassis and