开云体育

This just worked for me from archive.org. It is a zip with all volumes

Don't wait too long to build those Depression rigs.? This market dip is "transitory."? By the way, maybe don't buy PCB's if they get expensive, buy or swap equities in the dip.? Howard, n3fel

https://pimylifeup.com/raspberry-pi-wine/ https://www.instructables.com/How-to-Set-Up-Wine-on-Raspberry-Pi-1/ -- William, k6whp -------------------- "Cheer up, things could get worse. So I cheered

My ancient AADE L/C meter takes care of differences in toroid mix and capacitor values.? A NanoVNA follows and helps me get my filters looking just like the calculated printouts. John,? k0ebc

That's the spirit! When one looks back in history during the Great Depression or with the Resistance during WWII, people always found ways to use whatever was on hand to build receivers and

Jim, The link that Terry provided still works. Just change out the volume number like I did and you can get all 6 volumes. Just change the 3 to 1, 2, 4, 5, or 6 to get the other volumes. 73 Daniel

Terry the link to the other volumes vanished as well.? The material is at worldhistory and archive but they removed the download as pdf (or any other format) options. I do still see them in this

Still hoping that the Chinese PCB manufacturers find a way around this. One idea would be to open an office in the USA, and then batch ship to that office. The office would break down the batch and

Hey, if we need to, we'll do whatever we can to manage, and keep on building. I propose that we'll get creative and do the best we can with what we have and can get hold of, because we're radio

I read today the China tariffs will kick in on May first....that'll be the end of cheap shipping from there. KB9BVN

Bzzzzzzzzzzt.? The binary is for Intel/AMD processors.? Won't run under Wine on an Orange Pi. Or RISC-V processors, which I have a few of. Runs find on Linux with the Intel/AMD processors. --

..I may have missed this, but are you running Linux on your Pi machine? If so, LT Spice will run handily under Wine. -- William, k6whp -------------------- "Cheer up, things could get worse. So I

It's a different environment today for simulation. I can't run LTSpice on my ARM based Orange Pi 5 Plus like I can on the 32 processor Intel.? But I can run ngspice for circuit analysis

As a matter of record, I submitted an order to JLCPCB yesterday as a test for theirs 5x 100mm X 100mm specials and the total cost was $8 with cheap chicken shipping. -- of course -- I plan on doing

Jim, Thanks, I've used them before.? When do we start getting hit with the tariff charges?? Can I get an order in soon enough? I went ahead and ordered the Honbay trimmers, as I get them today

Caveat emptor? - I've good good parts from AliExpress, and I've gotten bad parts from AliExpress.

I just ordered an 80 piece assortment from AliExpress for $9.48 (about 12? each). Not sure of the quality but looking around on AliExpress, Temu, Tayda and Amazon, they all look the same. Most all

https://www.pcbdirectory.com/manufacturers?country=United%20States Russ K8UYM <developermcd@...> wrote:

I ordered a Made in USA backpack on eBay and had to clear customs It was used 25% tarrif applied by Canada to US products coming in. China is 10% tarrif . Canada is friendly to CCP for so many

Ditto. Tayda = almost always fine business parts for much less. Regards, Kirk, NT0Z My book, "Stealth Amateur Radio," is now available from www.stealthamateur.com and on the Amazon Kindle (soon)