开云体育

OK.? Patent pending has been removed.? You beat me to it Doug.? But, I use the small end of a zip tie.? When I dip into into the blob (sorry Steve McQueen), there is a sharp tip at the end of the

looks good.? looking forward to your video.? I play with hot air but have never tried a skillet.? I put a blob of paste on whatever scrap is at hand and apply with a toothpick.? on an indulgent

after ruining a handful SOIC parts trying to hand solder them, i spent fifty bucks and bought one of these hot plates: https://www.amazon.com/dp/B0CZLBSVGM i then spent a quiet afternoon with a couple

Your job does look great Chuck! I wonder if you could do this in the kitchen oven? I've checked the temp before, it is right on. 73, Gary WB6OGD

Thanks for the info on the labels Chuck. -Albert KI4ORI

Steve, Yes, the output from the G3URR testor is related to the crystal's Q. In my G3URR/W7ZOI measurement setup, I use a diode doubler on the output (from a G3URR article in the ARCI *QQ*) to a pair

Looks great, Chuck! Does it work??? 73 Mike M. KU4QO [email protected]> wrote:

Looks good! Better than hand soldering. Used to be able to do that ….. 73 de VK2HHS Henrik

It's a certain kind of ridiculous how small those have become! Considering my semi-senior eyesight, I have done well with hot air removal and replacement of tiny ICs, but I haven't yet tried the

Here is my second pass at the skillet method.? I am a fast learner, gotta give me that. I'll do a video of the patented paste applicator.? We don't need no stinking syringe. No solder bridges ever

Thanks Chuck, The Vevor is the one I looked at. I can't imagine cutting .250 aluminum with it but should be OK for 1/16 or maybe even 1/8. I'll watch the video and I think there would be many ithers

Robin, those are not crossed tweezers (as in self gripping).? That is what I prefer to use.? I bought a pair from I think TEengineering but the are similar to these Hakko tweezers:

I took the photo after the first solder bridge removal.? I reheated the board and the Microchip slipped into perfect alignment.? I have to get some solder braid. Any particular brand and mesh size?

I have a band saw to cut boards, but it doesn't have the depth for large areas. The hand held router allows me to cut boards to size and not take up a large area in the garage for a table saw, and

1.? The audio section is lacking in gain, for some reason, and it just may be the reason why Doug Hendricks, KI6DS, and Steve Weber, KD1JV, switched to an LM386 in the kit version.? I'll ask Doug

btw, if you really like to live dangerously, you can cut PCB with a micro table saw like this proxxon i bought for other projects: https://www.proxxon.com/us/micromot/37006.php easier to make square

thanks for sharing the photo. i have been trying to figure out how to build a platform for shearing PCB, built two versions that didn't work as well as I would like. question: what did you use the

No magnetic issues with these: https://www.ebay.com/itm/315450526702?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=7wkq96zotu-&sssrc=4429486&ssuid=GVPs0dMYQlG&var=&widget_ver=artemis&media=COPY

Go to officemax or staples and look at the avery stuff. They make a letter sheet size page for laser printers. It is clear and the one I use has matte finish and not the shiny stuff.? Make a front