开云体育

Namaste SarmaJi! New old stock! Not salvaged. 73 de EssGee -- One of those ... ...

Anyone have 2 of the 7mm size cans with nominal 3.5uH and BM winding config that they would part with? They may not be an exact fit to a 0.1 grid but using pads with large enough holes... ;-) Or use

You missed that day of class. Power is reversed. Signal is right. FYI chuck, k7qo

Fellow Hams, Some time ago in a moment of weakness I purchased the 1 MHz -1.1GHz LED Frequency Counter Tester Measurement For Ham Radio PLJ-0802-F from Ebay and promptly misplaced it. Well I found it

Namaste. jar of 7K coils !! salvaged ones or new ones old stock sir ? regards sarma vu3zmv wrote:

Great! I can now breath a sigh of relief! I have a jar of 7K coils but only a handful of 10K coils, Thanks and kind regards, 73 de EssGee VU2UT -- One of those ... ...

The recent ARRL board minutes, <http://www.arrl.org/files/file/2019%20Board%20of%20Directors/Final%20Minutes%20July%202019.pdf> , recommend corralling all the email robot stations (minute 31) to the

While not as plentiful as salvage, the 7K coils are the same as the 10K electrically. Unlike the 10K, the 7mm sized coils fit on 0.1" perfboard easily. Even the shield grounding lugs. Loadstone

I have been "hacking" Toko 10mm and other RF/IF coils for some time. A bit finicky but not too difficult but like everything else, practice helps. here are a few online resources as food for thought

This may have been posted but if so, I missed it... Found this website: < http://www.lodestonepacific.com/coilforms.php?gclid=EAIaIQobChMIlvTdkdyn5AIVD9bACh3bEgBSEAMYASAAEgJDiPD_BwE > From the

To the group: 1 Go to cpcares.com 2 On the left under parts click transformers3 Go down about one third at Xicon IF transformer click to order 4 go down 1/3 agn. 42IF123 10.7Mhz $1.85 + shipping from

1 Go to cpcares.com 2 On the left under parts click transformers3 Go down about one third at Xicon IF transformer click to order 4 go down 1/3 agn. 42IF123 10.7Mhz $1.85 + shipping from TN. Hope this

Chuck and all, Very sad to hear about Dick’s passing. Like many of you, I have a bunch of hours invested in some of Dick’s creations including an OHR Classic, an OHR 400, and a couple of smaller

Working on ideas for the input circuit for a 10MHz WWV receiver, chucks, KD1JVs and GQRP 30 M RX etc... I've looked at and tried various circuits, single-tuned and double-tuned bandpass using RF

Chuck, So very sorry to hear of Dick's passing. I fondly remember his OHR kits - I built two OHR-100s (40m and 30m), an OHR-500, a DD-1, and, of course, the ubiquitous WM-2. My first QRP kit was the

It is with sadness that I announce the passing of Dick Witzke on Saturday Aug 21, 2019 in Phoenix AZ. Dick was owner and kit designer of Oak Hills Research, which he bought from Doug DeMaw, W1FB, in

Hi Randy, let me know if one doesn't turn up. I should have one somewhere around here (built one back in the 90s). Tom w2crg

Hello, Bob. My fault to offer copy, originally. I forgot OHR , Mr. N1FN still sells those manuals for ten dollars, and I went ahead and ordered one from him to be forwarded to AB9GO. I think that is

I am happy to pay for shipping! D.K. Philbin KD6TK

Hi guys/gals, Can you share with the rest of the class? I have one too without docs. Many thanks es 72... -- 73... Bob de k2ki k2ki@... k2ki.bb@... (Goes to my cell) SKCC #12195 NAQCC