开云体育

Hi Ladislav

?

I am trying to get Qlog to connect to my Anvelina SDR running TCI, I use Thetis and have set it up as you can see in picture

?

?

but when I try to "Connect RIG" it give me this error:

?

?

?

any hint from you what I do wrong ???

?

73" oz1ct Ben

?

HI Ben,

it seems that you did not use the "Anvalina HF" TCI profile. You got a connection error that is from Hamlib. It means that you used a profile that had the Hamlib Interface type.

Regards

Ladislav

po 22. 7. 2024 v?18:13 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

Hi Ladislav

?

I am trying to get Qlog to connect to my Anvelina SDR running TCI, I use Thetis and have set it up as you can see in picture

?

?

but when I try to "Connect RIG" it give me this error:

?

?

?

any hint from you what I do wrong ???

?

73" oz1ct Ben

?

HI Ladislav

ok I got it up and running....

1. you have to enable 'Window' : Rig?

2. Equipment Connect Rig

3. select the radio you have in *Rig* via the drop down menu.

But if you change 'Rig' then you has to remember?also change the antenna as it do not change (radio?+ Power change)

it would also be nice if we have an 'Layout* menu so you know what you are using....maybe something?to combine whit?the *Rig* select menue????

73" OZ1CT Ben

Den tirs. 23. jul. 2024 kl. 11.00 skrev ok1mlg via <ok1mlg=[email protected]>:

HI Ben,

it seems that you did not use the "Anvalina HF" TCI profile. You got a connection error that is from Hamlib. It means that you used a profile that had the Hamlib Interface type.

Regards

Ladislav

po 22. 7. 2024 v?18:13 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

Hi Ladislav

?

I am trying to get Qlog to connect to my Anvelina SDR running TCI, I use Thetis and have set it up as you can see in picture

?

?

but when I try to "Connect RIG" it give me this error:

?

?

?

any hint from you what I do wrong ???

?

73" oz1ct Ben

?