¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Qlog
  2. Topics

New Issue

 

Since the update to 0.41.0 I'm having a strange issue. Nothing was changed other than the update and now my FTDX10 does not change band and frequency correctly. When clicking on a spot and going from 40/80m LSB to 10-20m USB, the frequency changes correctly (at first) but the mode does not change correctly. The third double-click causes the mode to change correctly but the frequency Is NOW offset by the USB/LSB difference. Then the third double-click puts the frequency right. It does this in both directions.

Can anyone point me in a direction of assistance?

Linux Mint 21.3

QLog 0.41.0 w/ hamLib 4.6

--
V/R,
Michael G. Mcguire, K3SNO
484-703-9591
So Mote It Be
 

Hi Mike,

you already reported something similar a few months ago. /g/qlog/message/472 So it's not a new behavior but just a change in behavior that may be caused by a hamlib upgrade.

see details below.


Especially the last link shows that there is no solution for it now.


p¨¢ 17. 1. 2025 v?3:23 odes¨ªlatel Mike - K3SNO, #707 via <mcguire2003=[email protected]> napsal:

Since the update to 0.41.0 I'm having a strange issue. Nothing was
changed other than the update and now my FTDX10 does not change band and
frequency correctly. When clicking on a spot and going from 40/80m LSB
to 10-20m USB, the frequency changes correctly (at first) but the mode
does not change correctly. The third double-click causes the mode to
change correctly but the frequency Is NOW offset by the USB/LSB
difference. Then the third double-click puts the frequency right. It
does this in both directions.

Can anyone point me in a direction of assistance?

Linux Mint 21.3

QLog 0.41.0 w/ hamLib 4.6

--
V/R,
Michael G. Mcguire, K3SNO
484-703-9591
So Mote It Be

1 - 2 of 2