Dear all,
I don't know if that is related to the problems already reported with wl2kserial.
set up and configured paclink-unix on a Pi with a PTC-IIe attached, using opensmtpd as mail daemon (only needs 4 lines of config for this setup, very nice).
wl2ktelnet works perfectly. Secure login is done (tried by removing the credentials, then it fails, so the challenge response seems to work ok).
wl2kserial however shows (this has been done with my friend's station in Curacao):
mycall PJ2BR
tones 4
chobell 0
lfignore 1
cmd:
c WG3G
wl2kserial: ---
wl2kserial: <Mycall: >PJ2BR<
wl2kserial: <
wl2kserial: <?cmd:
wl2kserial: <*** AUDIO TONES: 4
wl2kserial: <
wl2kserial: <cmd:
wl2kserial: <*** CHANGEOVER-BELL-PARAMETER: 0
wl2kserial: <
wl2kserial: <cmd:
wl2kserial: <*** LF IGNORE PARAMETER: 1
wl2kserial: <
wl2kserial: <cmd:
wl2kserial: <*** NOW CALLING WG3G
wl2kserial: <?*** CONNECTED TO WG3G
wl2kserial: <RMS Trimode 1.3.9.0 Welcome to WG3G
wl2kserial: <PJ2BR has 118 minutes remaining with WG3G
wl2kserial: <[WL2K-3.2-B2FWIHJM$]
wl2kserial: sid [WL2K-3.2-B2FWIHJM$] inboundsidcodes -B2FWIHJM$
wl2kserial: <;PQ: 303273??77
wl2kserial: <Perth CMS via WG3G >
wl2kserial: >; WG3G DE PJ2BR QTC 0
wl2kserial: >[UnixLINK-0.5-B2FIHM$]
wl2kserial: >FF
wl2kserial: <???????***?? [2] Secure login failed - no response to challenge - Disconnecting (186.45.79.221?)
wl2kserial: unrecognized command (len 106): /???????***?? [2] Secure login failed - no response to challenge - Disconnecting (186.45.79.221?)/
?Is that a known problem? Or can anybody confirm that he/she has wl2kserial running with working secure login?
Thanks for your replies!!
73s
?Torsten DL1THM
