开云体育

Roy - I've been trying to get several publications related to brickworks from you for about four months. Initially you seemed willing to sell these to me, but for the past two months you've been

John, If you switch to 7mm you can use HO scale lumber by Mt Albert or Kappler Mill & Lumber. Kappler do an HO 16x4 which is exactly 8x2 in O scale. Kappler can be obtained in Australia from

(1) Are you actually working to 14mm gauge? I am planning on it. I have obtained most of the kits produced by Roy Link. I will be leading a focus group on O-14 at the next Australian Narrow Gauge

Grant (and others), Of course I can - what was I thinking... It's also been pointed out that "standard" 3-ft wheels in 4mm (00 gauge) are 12mm - 21.3" in 7mm scale. That's pretty close to my 21"

No it was someone else. I am still using the original gearhead motors. quiet I am currently using DC. I keeping reading good reviews about the Ossynths system. However my layout is (or will be)

Please remember that Ossynths systems are 'custom built' by Otto to suit individual requirements. I know Otto has built a system for someone to run three different locos (steam). you would need two

Dear Charles, Sincere apologies, I got thoroughly confused with our dealings, to the point where I put my head in the sand. Please confirm EXACTLY what you want, plus how you want to pay, and I will

I believe that Paragon supplies all of Roy's stuff. They were very helpful to me on a recent order of his manual but I believe the binder is out of stock so I received a plain one instead. I can't

Steve and All, I said I would report on progress with RCL Lister and DCC. I've spend another afternoon playing with it, and I have got a DCC chip in. I've used the Digitrax DZ123, though with a bit

You may want to look at the new "scale size" KD couplers #58 as I recall. They come out as a 1/2 size MCB coupler in 1/48 definitely suited for industrial use in 7mm. Bill Uffelman Las Vegas

Frank, Somehow I think the full size Baldwin may be completed before mine is!

spend I've might painted How well does she run on DCC? I am using DCC with 0-9 have just used a couple of Lenz decoders and a couple of TCS - the TCS are OK the Lenz are very good - I also model

Here are my answers (for what it's worth!): (1) Are you actually working to 14mm gauge? Yes - ish - I have a number of Roy Link's kits, but nowhere to run them at the moment (2) if so are

--- Frank Sharp <Frank.J.Sharp@...> wrote: (1) Are you actually working to 14mm gauge? Yes--for about 8 months on and off. (2) if so are you using the RCL standard, if not what

Although Sorry it isn't clear, unlike Otto's sounds....... What I meant was thhat the difference between 2 and 3 cylinder locos might not be discerned by most. Adrian

--On 19 December 2004 12:47 +0000 Frank Sharp <Frank.J.Sharp@...> wrote: No. I have gone too far down the path of larger narrow gauge railways on 16.5. Very little of my stock would be

Just realised I answered question 2 incorrectly. I am using fine 00 standard, based around Romford loco wheels. Carriages and wagons were fitted with the finer Gibson wheels, but all are now being

I have loaded some photos into the photo section in a file called Lister. By some miracle they seem to be a sensible size, I only wish I could remember how I did it! Lister 1 Top view, you can see

My answers are: (1) Are you actually working to 14mm gauge? Yes (2) if so are you using the RCL standard, if not what variation are you using? I'm using Roy's standards. (3) What are you