开云体育

http://groups.yahoo.com/group/016-5_Online/?yguid=91018691 should get you there or at least use O16-5_Online in the Yahoo groups search box. Bill Uffelman Can anybody tell me if there is a

able to I dont mean to be facetious but this should be the right group for modelling the L&B. O-16.5 is too wide a guage for modelling such a beautiful railway. Regards John

All, As a new chum to this group, currently not modelling in O-14mm, but having a look at this area out of interest due to the release of the BM Garratt kits. I've read all the posts on the group,

Ian, Track Gauges for 14mm are available from Roy Link, an etched brass version which is also a back to back gauge etc. http://www.paragonnarrowgauge.co.uk/ now seem to handle these for Roy.

G'day all, I just added a page about my production of Burra, it has some poor photos of the test chassis and a bit of history. http://www.geocities.com/mark_the_train_brain/burra.htm Lots of work to

Hi Forgive the cross post for those who are also members of the 7mmnga group. I am trying to find out the rail dimensions for the various rail sections in common use between codes 55-100.

The Peco IL-115 rail (code 82) is as follows: Foot - 1.77mm Head - 0.89mm Height - 2.08mm I chose this rail for use with the RCL 14mm gauge components as, unlike other sizes, it is an exceptionally

Hi list: FYI, a member of the South African Railways modelling list has expressed interest in developing and producing a short run - about 100 kits - in resin for the NGB class wagons in 7mm scale

Following Trevor's request for information I emailed colleagues on the WHR. We have no drawings at present, though we do have a lot of 'B' wagons. However, one of our number is currently in Jo'burg

Hi I am doing some research into suitable rail for representing NG track in the smaller weights which equate to code # ranges 40-100. I have good details on Peco rail, but I am also aware that there

G'day John, I have Atlas code 83 rail stripped from HO flextrack, the dimensions are: A Rail head 0.8mm B Rail Height code 83 C Foot Width 1.9mm D web thickness 0.4mm I also have some Code 55 rail,

Hi Mark Thanks for the info. I've got the full details on Peco now. Ive also got plenty of prototype info. I get the impression that Micro Engineering rail has a very accurate profile but getting

John, I have ME code 55 and code 70 rail at home, but nothing other than calipers to measure with. I could get rail head width and base width, but the web might be tricky. I am interested in why

Hi John Head and base width would be useful if you can get reasonably accurate measurements (e.g. to 0.1 mm) This is part of my research into what model rail is available in the marketplace and

John, Seems like an interesting article (or series), getting down to such fine detail about rail sizes. I measured my Micro-Engineering rail, although my digital calipers don't seem to be accurate,

Thanks for this John. Regards John

I've started work on my K1 garratt again, after a break for other modelling needs. I've sorted out the problems with the crank mounting system, by doing away with the little plastic inserts. I have

David, I've done the G16 in a very similar way, but used Branchlines 1/8th to 1.5mm reducing bushes as the 'boss'. Mine are not interchangeable and are fixed with Araldite. I quartered using a

G'day everyone, The group's homepage has had the same picture since inception, its time to change it. Now, I need everyone to send in photos of their efforts in so a fresh picture can be shown. If

Mark, I have created an album called SJH in the photos section with some of my stuff in it. There's a lot more, but none of it is finished! Please let me know if the resolution is OK if you decide to