¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Network105
  2. Topics

Kam Plus has two different Btexts? Status Checks?

 

I've just set up my previously owned KAM Plus for HF and VHF operation, having disconnected my SignaLink with EasyTerm and SoundModem for HF, and PK232 for VHF.
?
I think the KAM Plus is properly operating but I'm still learning its parameters.? Right now I have an earlier version of my Btext on VHF and a newer version on HF.? I don't see any way to correct this or set up the same or different Btexts for the different modes.? Any suggestions/
?
Also, if anyone sees my signals or connects to me and notices any non-standard operation, please let me know.
?
Thanks and 73,
?
Daniel N0BN
 

Daniel,
the BTEXT is the same for both ports, unlike most Params where they are HF/VHF
there is only one BT.
would be nice though.
73
Jim KI0BK?
?
 

Here's my VHF beacon:
N0BN>BEACON,AB0VZ-7/V: <UI>:
N0BN-1/B N0BN-2/G N0BN-7/N; Bailey,CO DM79hi; Colorado R2D3/R1D6; HF-VHF Gateway:145.050
N0BN>BEACON,AB0VZ-7*/V: <UI>:
N0BN-1/B N0BN-2/G N0BN-7/N; Bailey,CO DM79hi; Colorado R2D3/R1D6; HF-VHF Gateway:145.050
?
My HF beacon:
N0BN>BEACON/H: <UI>:
N0BN-1/B N0BN-2/G N0BN-7/N; Bailey,CO DM79hi; Colorado R2D3/R1D6; HF-VHF Gateway:145.050
?
Another set of HF and VHF beacons:
?
N0BN>ID/H: <UI>:
N0BN/R BAILEY/D N0BN-2/G N0BN-1/B N0BN-7/N
N0BN>ID,AB0VZ-7*/V: <UI>:
N0BN/R BAILEY/D N0BN-2/G N0BN-1/B N0BN-7/N
?
I just figured out the latter are the HID identifications transmitted every 9.5 minutes if HID is on.? I turned it off.
?
So anyway, as I asked before, let me know if anyone notices anything non-standard about my stations or transmissions!
?
Thanks again!
?
Daniel N0BN
?
?

1 - 3 of 3