开云体育

Fldigi spot Op wo 21 aug. 2024 23:06 schreef Don Rolph via groups.io <don.rolph= [email protected]>:

Bob, thanks for the ti ps! I will poke some more. [email protected]> wrote:

Hi Don I vaguely also remember that squelch action interrupted good decoding, so squelch disabled as one would for Olivia. Most of my tests though were with Thor Micro. FEC can also be

We were exploring Domino EX micro to break through poor propagation conditions. Small scale testing demonstrated that it functioned, but when we tested at scale with multiple stations we got

https://qrpguys.com/qrpguys-dsb-digital-transceiver2

That result makes sense being a double side band transmission. Sounds like operator ignorance on how it operates over it being a bad product. It would be no different (other than carrier) than running

Not going to mention names, so people can avoid this inadequate radio? Andrew, KA2DDO ________________________________________ Sent: Monday, August 5, 2024 9:30 AM To: [email protected] Subject: Re:

There is one manufacturer of kit radios that is advertized for use with the FT modes.? It is a simple double sideband transceiver.? Even if not overdriven with hot audio it produces both an upper

Hi Dave, Obviously something changed but I don't know what it was. I think that FLRIG was not updated. I am using the AmRRON build script to create my Pi. I built that machine three times - always

Hi. What changed, between "Working S meter" display, and "Not Working" ??? Was Flrig updated perhaps? 73. Dave G0WBX -- Created on and sent from a Unix like PC running and using free and open source

Hi. In many modes (PSK especially) Lower Case characters are sent faster, than using all Upper Case. Take a look at the in-app documents relating to PSK31 and how the text is coded. It's trivial to

Indeed. There are some truly awful PSK31 signals around.? One I saw yesterday, the actual PSK signal was mostly clean, and low(ish) IMD (-20dB or so) but there was a broad band of lower level

I saw it a lot years ago on psk31. I'm sure it's a lot of the same operators just plug and play without adjusting or ever checking the ALC. Rob KD8FTR Extra class ARRL VE On Sun, Aug 4, 2024 at 3:03

Great post Dave. I see this QRM on 20m clobbering what is primarily the Olivia operating area quite often. Maybe even IMD in the TX mixer combined with the obvious other sideband suppression of the

Hi Bob, Clicked Config | setup | polling.? Set all.? Closed and reopened FLRIG. The s-meter shows a constant value (see below) Clicked config | xcvr.? There is a control stack on the right,

Now, THAT is impressive. Yet another way to plug up the digital bands. The perpetrators are probably totally unaware if these products are not visible on their waterfall. Dust off the

Hey folks: I've been stymied by this issue for a while.? For "some reason" any text I transmitted in FLDIGI went out in all lower case regardless of whether I entered it with capitals.? I finally

Hi. One thing to be aware of, if you run a mode with an audio component less than half the highest audio frequency your radio will pass on transmit, is that any audio distortion products will be

Sara make sure you put frequency change first then next line modem change. If you do it in reverse you have to click your macro twice to work. Just an FYI 73 Don ________________________________ Sent:

Hi Richard Configuration | Poll possibly? ie the top row (or more) should be checked and? "disable"s unchecked. Cheers Bob VK2YQA