开云体育

KF8NOA, Excellent piec of work. Thanks for letting me know. [email protected]> wrote:

Hey Don:? If the question of running two instances / versions of FLDIGI at the same time is related to being able to do FLDIGI and FSQ "simultaneously" then the answer may be to use FLDIGI for

Hi Don, I am running a Raspberry Pi 4b and Yaesu FT710. The radio is tuned to 7.110. On the Pi I am running flrig for cat, two instances of FLDIGI, one for contestia 4/250 at +900 and one for FSQ at

Thank you Bob! [email protected]> wrote:

Oh and to explain my PSM suggestion Don. PSM is "kind of " like the old AX25 FM squelch detect where the TX wont key whilst a valid signal is still in the RX passband. It does this by "buffering" the

Thank you Bob. I wil test. [email protected]> wrote:

Hi Don I often run two instances of fldigi using the same audio device (Icom 9100) I also can concurrently run wsjt-x and qsstv. CAT is shared via flrig. I do of course QSY for the latter modes. The

John W0JWT thanks for you reply. I looking at: http://www.w1hkj.com/FldigiHelp/operating_multiple_copies_page.html#:~:text=Each%20instance%20will%20have%20it's,allow%20that%20type%20of%20sharing . it

Okay, as long as you are transmitting 2 at one time, it may work fine. It goes without saying that you won't be able to send one and receive the other at the same time. Still use 2 directories, a

This is a strange problem you're trying to solve. Do you really need to run two modes on the same transceiver at the same time? You do realize that will cause problems when one mode wants to transmit

Use Flrig to control the two fldigi setups. Search the web, there are some doc. on how to do it. [email protected]> wrote:

kd8ftr: Thanks for replying. So this is using two different transceivers. My need is to run two modes simultaneously on one transceiver/one frequency. So I believe i would have to be able to share the

I have setup 2 instances of FLDigi one VHF one HF. I used a signalink for one instance and internal card for the other, so I can't think of a way to share one card easily. For setup I created two

1) How does one share the sound devices? 2) How does one avoid collisions over rig control ports? 3) how does one ensure separate fldigi.files space? Thanks in advance! -- 73, AB1PH Don Rolph

Raspberry Pi 4, bookworm, I leave my radio (Yaesu FT-710) and RPi running all the time.? Yesterday I was getting a lot of decoded noise and I noticed that the squelch was off so I turned it on -

Running bookworm. FLDIGI has been running for several hours.? I open a VNC window and see the FLMSG window.? It is stopped because there was a checksum error.? I accept the error, read the message

I had originally thought to make this a wiki entry, but this and other ideas are probably worth discussing. It may be of use to the NBEMS groups. Note these methods generally are not worth it if the

Lem/Bruce I launch a fldigi-shell flrig-shell bash script as needed to log various parameters, including s/n. The script is is very untidy/rough. I'll streamline it one day hi. Partial; while [ -f

Bruce, I use the same macro.? When I'm trying to capture it for a log I copy the S/N into the fldigi log. A couple of us have looked at this and have not found an automated means.? If anyone has an

Is there anyway to capture the S/N of a station when they check into a net? I use FLnet to log stations. I could also record them in a log for FLdigi. The current macro I am using is: <CALL> <INFO1>