开云体育

Hi. What changed, between "Working S meter" display, and "Not Working" ??? Was Flrig updated perhaps? 73. Dave G0WBX -- Created on and sent from a Unix like PC running and using free and open source

Hi. In many modes (PSK especially) Lower Case characters are sent faster, than using all Upper Case. Take a look at the in-app documents relating to PSK31 and how the text is coded. It's trivial to

Indeed. There are some truly awful PSK31 signals around.? One I saw yesterday, the actual PSK signal was mostly clean, and low(ish) IMD (-20dB or so) but there was a broad band of lower level

I saw it a lot years ago on psk31. I'm sure it's a lot of the same operators just plug and play without adjusting or ever checking the ALC. Rob KD8FTR Extra class ARRL VE On Sun, Aug 4, 2024 at 3:03

Great post Dave. I see this QRM on 20m clobbering what is primarily the Olivia operating area quite often. Maybe even IMD in the TX mixer combined with the obvious other sideband suppression of the

Hi Bob, Clicked Config | setup | polling.? Set all.? Closed and reopened FLRIG. The s-meter shows a constant value (see below) Clicked config | xcvr.? There is a control stack on the right,

Now, THAT is impressive. Yet another way to plug up the digital bands. The perpetrators are probably totally unaware if these products are not visible on their waterfall. Dust off the

Hey folks: I've been stymied by this issue for a while.? For "some reason" any text I transmitted in FLDIGI went out in all lower case regardless of whether I entered it with capitals.? I finally

Hi. One thing to be aware of, if you run a mode with an audio component less than half the highest audio frequency your radio will pass on transmit, is that any audio distortion products will be

Sara make sure you put frequency change first then next line modem change. If you do it in reverse you have to click your macro twice to work. Just an FYI 73 Don ________________________________ Sent:

Hi Richard Configuration | Poll possibly? ie the top row (or more) should be checked and? "disable"s unchecked. Cheers Bob VK2YQA

Running FLRIG version 2.0.05.? I had s-meter, power meter, SWR etc working.? Somewhere along the line they stopped working.? I must have done something to make them stop working but I don't know

Great discussion.? Seems like we could move Olivia to 1000.? I already have a simple macro to switch to Olivia and it would just take a second to add a line to it to change the frequency.???

Jack KD4IZ and Don AB1PH, When I tested with Fldigi only it appeared to work but with radio on I can see 1000 as red and 1500 as green. As confirmed by Dave W1HKJ FSQ is fixed at 1500. The good news

Thanks Don, I understand and I do use fldigi macros extensively. But thank you for reviewing them for others. The root of my question is that yes, you can move the window on screen, however the

If you unhighlite the LK button what does it do? [email protected]> wrote:

Ok I tested this. Indeed it does move the cursor and change the center frequency. . However, FSQ still transmits on 1500 Hz center. [image: image.png] It looks like this center frequency is hard coded

Hi Jack, As I understand it the GOFREQ command is independent of modem choice. It moves the WF cursor to freq NNNN Hz. That being said you can add a modem change in the same macro. It would look like

Hi Don, You have tested this macro for FSQ? Or is this macro to shift other modes? Jack - KD4IZ Sent: Thursday, August 1, 2024 21:41 To: [email protected] Subject: Re: [nbems] FSQ in FLDIGI: center

Don I had another thought besides changing the sweet spot. You can also make up a macro to go to whatever frequency you want to TX to . Simply use <GOFREQ:NNNN>. A fancy macro to change frequency