开云体育

My apologies for the delay, I have been out of town. First: - FLRIG will terminate abnormally even when I am only receivikng - CAT control works stably with hamlib, Win;link Packet/soundmodem, Wink HF

I am using: - Yaesu FT-817ND - Dinah sound card o https://kits4hams.com/dinah - I am enabling config>rig control>C-Media PTT> use C-media PTT checked Test works and lights the red PTT light on the

Don I have been using DRA sound cards and Fldigi (mostly on 2m FM Icom and Kwnd rigs) using the C-Media RA adapter for PTT. However, I have found “redundancy” for PTT in Fldigi is not good; that

Using an Allstar style interface with NBEMS. Thanks! -- 73, AB1PH Don Rolph

http://www.w1hkj.com/alpha/fldigi/ * fldigi-4.2.04.11.tar.gz <http://www.w1hkj.com/alpha/fldigi/fldigi-4.2.04.11.tar.gz> * fldigi-4.2.04.11_LI.dmg

http://www.w1hkj.com/alpha/fldigi/ * fldigi-4.2.04.10.tar.gz <http://www.w1hkj.com/alpha/fldigi/fldigi-4.2.04.10.tar.gz> * fldigi-4.2.04.10_LI.dmg

Flamp 2.2.11.14 fixed the compatibility issue with 2.2.11 and the file is readable when I use compression. Thanks for the fix. The other thing I noticed is when I added the file to Flamp I didn't

at http://www.w1hkj.com/alpha/flamp/ * flamp-2.2.11.14.tar.gz <http://www.w1hkj.com/alpha/flamp/flamp-2.2.11.14.tar.gz> * flamp-2.2.11.14_LI.dmg

Patch submitted, audio recorded using FLAMP 2.2.11.13, and correctly decodes using FLAMP 2.2.11. Robert.

Confirm that 2.2.11 and 2.2.11.13 parse the relay file differently: dave@tk7:~/.nbems/FLAMP/rx$ cat *00.txt

Robert, One of the local stations just did a test. We are finding out that if both stations are using 2.2.11.13 it works with compression. If the receiving station is an earlier version then it fails

Hi Robert, Thanks for checking this. The original file attached is pa_407.txt and the file name from the relay folder is 29CA_pa_407.txt. When the receiving station tries to open pa_407.txt with

Ron, Tested a compressed checked file locally using audio record/playback from FLDIGI and it decoded fine. Can you please post the file in question and the parameters used. A better option is to post

Using latest Alpha Flamp 2.2.11.13. If I send a short .txt file with Comp checked the receiving station receives it with no blocks reported with errors. The file opens up with the first word as

*Here is the?? PPT? attached that I have prepared to go over on the next few months of Zoom Class: Sound Card Digital Modes for Rookies* * * *I will go over the first 30 slides on April 6 -

Oh sigh

They switched to 105 several years ago because it gets thru better in poor conditions. Jim Falls K6FWT FH #5036

posted at http://www.w1hkj.com/alpha/flrig/ * flrig-2.0.05.34.tar.gz <http://www.w1hkj.com/alpha/flrig/flrig-2.0.05.34.tar.gz> * flrig-2.0.05.34_LI.dmg

Not a hint. 20 went dead except for occasional FT8…… ? I think this’ll shake out in a month as we swing deeper into spring. Jim K6FWT

I use a TS-990 transceiver.? It switches back and forth depending on which audio input is active.? So FLDIGI sends through the USB port on this rig, and voice comes through the microphone.? PTT