|
I have 3rd screws from my 3d printer we can try. Ace hardware has a test
toggle quoted message
Show quoted text
plate if you bring one down you can try it there. They may even have longer ones in stock. On Oct 24, 2019 6:01 PM, "Bear Albrecht" <W5VZB.NM@...> wrote:
Who might know the specs on the nylon screws that hold the nanoVNAs |
|
Nigel Gunn, G8IFF/W8IFF
Mine doesn't have any nylon screws.
Brass hex spacers and black steel screws. Look like M2. On 24 October 2019 at 20:00 Bear Albrecht <W5VZB.NM@...> wrote:Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@... www |
|
On Thu, 24 Oct 2019 at 20:01, Bear Albrecht <W5VZB.NM@...> wrote:
Who might know the specs on the nylon screws that hold the nanoVNAsMine is M2.5. I know that because I have one of those multiple length standoff/nut kits from Adafruit in that size, and the nylon standoffs fit. I needed longer standoffs because I soldered header pins onto the interface / DFU mode side of the board and those pins were too tall for the stock standoffs. --buck |
Bear Albrecht