开云体育

Cases

Lyle Bickley All Messages By This Member #8370 Hope the keyboard lived through the experience ;) I'm interested in a case as well. Cheers, Lyle NM6Y On Wed, 18 Dec 2019 06:19:40 +0000 "Les Brown" <les.m0lpb@...> wrote: Sorry, had to run and the keyboard hit the floor. I have downloaded a basic design, and we can mod it as we like. But as I keep saying, the cost will be min. For all Ham radio Lic. Holders. 73 Les M0LPB -- 73 NM6Y Bickley Consulting West Inc. "Black holes are where God is dividing by zero" -- 73? ?NM6Y Bickley Consulting West Inc. "Black holes are where God is dividing by zero"
Mike Brown All Messages By This Member #8410 FWIW I haven't printed hagster's design but have printed cases for my two NanoVNAs and one for a friend, based on the design by VK5ZBR. Unfortunately every one had to be different due to physical differences between the three VNAs and from VK5ZBR's. This is presumably why there seem to be no commercial cases for NanoVNAs. The exact position of the SMA connectors and their spacing, together with the USB position can be different from clone to clone. There can also be quite a difference in thickness and screw positions too. Some issues can be sorted by filing but I found I needed to increase the height of the top slightly for two of the clones. 73 Mike
Les Brown All Messages By This Member #8411 Hi, Mike Thanks for the advice, and I will take this on board. I have a general dimensioned drawing of one, and I think when I start looking at possible design’s, I would ask our members to download this drawing I have found, and ask them to check it and amend against the ones they hold. Thankyou for that and defiantly taken on board. 73, Talk soon Les – M0LPB Sent from Mail ( ) for Windows 10 From: Mike Brown ( mbmail@... ) Sent: 19 December 2019 11:36 To: [email protected] Subject: Re: [nanovna-users] Cases FWIW I haven't printed hagster's design but have printed cases for my two NanoVNAs and one for a friend, based on the design by VK5ZBR. Unfortunately every one had to be different due to physical differences between the three VNAs and from VK5ZBR's. This is presumably why there seem to be no commercial cases for NanoVNAs. The exact position of the SMA connectors and their spacing, together with the USB position can be different from clone to clone. There can also be quite a difference in thickness and screw positions too. Some issues can be sorted by filing but I found I needed to increase the height of the top slightly for two of the clones. 73 Mike

Previous Topic Next Topic