¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

NanoVNA-H v0.4.0


 

New firmware from hugen:

NanoVNA-H version compiled on November 15, 2019

Using the code of nanoVNA-Q of qrp73, the driving of si5351 and aic3204 is more reasonable. By judging that the si5351 locking state is more reasonable than simply setting a delay, it can effectively avoid the noise caused by the unstabilization of si5351.

Unlike the compilation optimization of QRP73 and edy555, inline optimization is not disabled, and the refresh efficiency is better. Due to limited flash space DUMP, SCANRAW, COLOR commands are not available.

Optimized for AA version display.


 

Sorry but what is?AA version display. pls ????

On Friday, November 15, 2019, 08:57:50 PM GMT+2, Gyula Molnar <gyula.ha3hz@...> wrote:

New firmware from hugen:

NanoVNA-H version compiled on November 15, 2019

Using the code of nanoVNA-Q of qrp73, the driving of si5351 and aic3204 is more reasonable. By judging that the si5351 locking state is more reasonable than simply setting a delay, it can effectively avoid the noise caused by the unstabilization of si5351.

Unlike the compilation optimization of QRP73 and edy555, inline optimization is not disabled, and the refresh efficiency is better. Due to limited flash space DUMP, SCANRAW, COLOR commands are not available.

Optimized for AA version display.


 

Cornellu,

"AA version display" is a version with larger fonts but only two traces are displayed. You can find the firmware release at



Ken


 

Hi all,

sorry to ask , but I need a translator help for "DUMP, SCANRAW, COLOR commands are not available".

Please correct me, if I got it wrong:
Dump is "screen dump", so a copy of the screen by a PC software.
SCANRAW : reading of scan values without correction applied: Do I need this for a Software linke NanoVNA-Saver or is it an unused feature?
COLOR: sounds like a manual setting of the colors ? Is it used by PC software and which?

@Cornellu:
Others may again correct me, but aa-Version is the name for "Antenna-Analyser", which means, that that only S11 (CH0) and 2 traces on the device are supported, but with bigger Fonts. No S22 "through" measurements possible.

vy73 de Karsten, DD1KT


 

You are correct for scanraw and color...not needed for pc.?
Capture used for screendump.?
Dump used to dump Cal and measured parameters.?
Please look at my Console Commands doc in files section.?
On Sat, 16 Nov 2019 at 8:32 am, Karsten, DD1KT<ktholmann@...> wrote: Hi all,

sorry to ask , but I need a translator help for "DUMP, SCANRAW, COLOR commands are not available".

Please correct me, if I got it wrong:
Dump? is "screen dump", so a copy of the screen by a PC software.
SCANRAW : reading of scan values without correction applied: Do I need this for a Software linke NanoVNA-Saver or is it an unused feature?
COLOR: sounds like a manual setting of the colors ? Is it used by PC software and which?

@Cornellu:
Others may again correct me, but aa-Version is the name for "Antenna-Analyser", which means, that that only S11 (CH0) and 2 traces on the device are supported, but with bigger Fonts. No S22 "through" measurements possible.

vy73 de Karsten, DD1KT


 

On Sat, Nov 16, 2019 at 10:31 PM, Larry Rothman wrote:


You are correct for scanraw and color...not needed for pc.?
Capture used for screendump.?
Dump used to dump Cal and measured parameters.?
Please look at my Console Commands doc in files section.?
On Sat, 16 Nov 2019 at 8:32 am, Karsten, DD1KT<ktholmann@...> wrote:
Hi all,

sorry to ask , but I need a translator help for "DUMP, SCANRAW, COLOR commands
are not available".

Please correct me, if I got it wrong:
Dump? is "screen dump", so a copy of the screen by a PC software.
SCANRAW : reading of scan values without correction applied: Do I need this
for a Software linke NanoVNA-Saver or is it an unused feature?
COLOR: sounds like a manual setting of the colors ? Is it used by PC software
and which?

@Cornellu:
Others may again correct me, but aa-Version is the name for
"Antenna-Analyser", which means, that that only S11 (CH0) and 2 traces on the
device are supported, but with bigger Fonts. No S22 "through" measurements
possible.

vy73 de Karsten, DD1KT




The aa version can still be used for s21 measurements, and just to display larger fonts, trace 2 and 3 are removed, and you can still display s21 data in trace 0 and 1.

hugen


 

Excellent alternative. It helps dramatically to read the display.
Rolf


John Ackermann N8UR
 

Will this firmware version provide full functionality when used with an
external program like NanoVNA-Saver?

Thanks,
John
----

On 11/16/19 10:11 AM, rolf.ch.bucher@... wrote:
Excellent alternative. It helps dramatically to read the display.
Rolf



 

On Sat, Nov 16, 2019 at 11:45 PM, John Ackermann N8UR wrote:


Will this firmware version provide full functionality when used with an
external program like NanoVNA-Saver?

Thanks,
John
----

On 11/16/19 10:11 AM, rolf.ch.bucher@... wrote:
Excellent alternative. It helps dramatically to read the display.
Rolf


Yes, full functionality is available.

hugen


John Ackermann N8UR
 

Thanks! That seems like a really useful combination then -- simple,
easy to read display on the go, with full power when you're connected to
a host.

On 11/16/19 10:52 AM, hugen@... wrote:
On Sat, Nov 16, 2019 at 11:45 PM, John Ackermann N8UR wrote:


Will this firmware version provide full functionality when used with an
external program like NanoVNA-Saver?

Thanks,
John
----

On 11/16/19 10:11 AM, rolf.ch.bucher@... wrote:
Excellent alternative. It helps dramatically to read the display.
Rolf


Yes, full functionality is available.

hugen



 

John,
Try Dennis Real's firmware release for an even better antenna analyser experience. Search for forum member reald here or on GitHub.?



On Sat, 16 Nov 2019 at 11:00 AM, John Ackermann N8UR<jra@...> wrote: Thanks!? That seems like a really useful combination then -- simple,
easy to read display on the go, with full power when you're connected to
a host.

On 11/16/19 10:52 AM, hugen@... wrote:
On Sat, Nov 16, 2019 at 11:45 PM, John Ackermann N8UR wrote:


Will this firmware version provide full functionality when used with an
external program like NanoVNA-Saver?

Thanks,
John
----

On 11/16/19 10:11 AM, rolf.ch.bucher@... wrote:
Excellent alternative. It helps dramatically to read the display.
Rolf


Yes, full functionality is available.

hugen