开云体育

Manual

Vince Rooney All Messages By This Member #1001 Now that I’ve received mine and have begun devouring the posts on this site and other info to learn more and enhance the usefulness of this amazing little kit. I was wondering if there would be interest in starting to put together a “manual” that can help everyone here and newcomers on the device. Something maybe in google docs?
Clint Sharp #1004 Yes, emphatically yes. I'm hopeful mime will have arrived by the time I'm home from work today so I'll need a helping hand and a good manual will be invaluable. toggle quoted message Show quoted text On Thu, 15 Aug 2019, 03:29 Vince Rooney, <vince@...> wrote: Now that I’ve received mine and have begun devouring the posts on this site and other info to learn more and enhance the usefulness of this amazing little kit. I was wondering if there would be interest in starting to put together a “manual” that can help everyone here and newcomers on the device. Something maybe in google docs?
F4WCV All Messages By This Member #1005 How do I load the AA firmware? My friend wants to buy one for his antenna analyser work. Manual says it can be done, but no instructions. In fact where is the code?Sent from my Samsung Galaxy smartphone. toggle quoted message Show quoted text -------- Original message --------From: Clint Sharp <cjaysharp@...> Date: 15/08/2019 13:06 (GMT+01:00) To: [email protected] Subject: Re: [nanovna-users] Manual Yes, emphatically yes. I'm hopeful mime will have arrived by the time I'mhome from work today so I'll need a helping hand and a good manual will beinvaluable.On Thu, 15 Aug 2019, 03:29 Vince Rooney, <vince@...> wrote:> Now that I’ve received mine and have begun devouring the posts on this> site and other info to learn more and enhance the usefulness of this> amazing little kit. I was wondering if there would be interest in starting> to put together a “manual” that can help everyone here and newcomers on the> device. Something maybe in google docs?>> >>
Larry Rothman All Messages By This Member #1006 Folks, ALL the information you require is already in the various parts of this forum. Please use the SEARCH function or look in the FILES and WIKI areas. There are also links to hugen's google drive area (link) that has ALL THE INFO you need to operate AND flash new firmware! Check the Wiki for links to documents on how to use a VNA. Cheers, Larry
Clint Sharp #1007 With respect Larry, "search the forum, read the wiki, check these other documents" sounds like exactly the reason why there needs to be a manual, to gather that information into a single, concise document that can be edited and contributed to as the device matures and develops. toggle quoted message Show quoted text On Thu, 15 Aug 2019, 13:13 Larry Rothman, <ac293@...> wrote: Folks, ALL the information you require is already in the various parts of this forum. Please use the SEARCH function or look in the FILES and WIKI areas. There are also links to hugen's google drive area (link) that has ALL THE INFO you need to operate AND flash new firmware! Check the Wiki for links to documents on how to use a VNA. Cheers, Larry
Larry Rothman All Messages By This Member #1009 Clint - the Wiki IS the manual.... And yes, it DOES have the info members in the last few posts are looking for.
Clint Sharp #1010 So there's no need to search the forum or files section? toggle quoted message Show quoted text On Thu, 15 Aug 2019, 13:24 Larry Rothman, <ac293@...> wrote: Clint - the Wiki IS the manual.... And yes, it DOES have the info members in the last few posts are looking for.
Hans J Albertsson All Messages By This Member #1011 :-)... I agree with Mr Sharp's sentiments, entirely. Den tors 15 aug. 2019 14:29Clint Sharp <cjaysharp@...> skrev: toggle quoted message Show quoted text So there's no need to search the forum or files section? On Thu, 15 Aug 2019, 13:24 Larry Rothman, <ac293@...> wrote: Clint - the Wiki IS the manual.... And yes, it DOES have the info members in the last few posts are looking for.
Vince Rooney All Messages By This Member #1012 I wasn’t looking to stir the pot or anything. It just seems that there is so much fragmented information on the device that it makes it difficult to figure out where to start, especially for someone who has never used a VNA. As an aside there are also so many variants of the unit, versions of software, vendors to purchase from as well as the messages on this forum not really categorized, it can be daunting. I’m going to work on a manual time permitting for myself and to share. It’s a learning experience for me as well. Suggestions and contributions welcomed. I feel the device is a wonderful piece of kit that can be a great asset and teaching tool for all hams and tinkerers. 73, Vince
Larry Rothman All Messages By This Member #1014 On Thu, Aug 15, 2019 at 08:37 AM, Hans J Albertsson wrote: :-)... I agree with Mr Sharp's sentiments, entirely. Great! Then let us ALL start contributing to updating the nanoVNA WIKI's various sections. Vince - You're not stirring the pot ;-) As Clint stated: "...there needs to be a manual, to gather that information into a single, concise document that can be edited and contributed to as the device matures and develops." Well, that describes the NanoVNA Wiki. I have already created a number of entries as have a few others. In fact, I just added the DFU flashing instruction document link. Where did I get the info from - I searched the Internet and brought it together in one place. It's call research - you can learn a lot by sifting through various data sources. So - If you look through the 1000+ forum posts and see something of interest that has not been added to the Wiki, add it under the appropriate section as has already been done. This includes updating the WIKI, LINKS and FILES areas. There is also a MODS area - if you've seen my posts, I've been modifying my Gecko VNA quite a bit. Maybe some can create a HOUSING section in the Wiki and place the STL files, or links to them, there? (I just created the folder - let's upload some STL files!) Sky's the limit - start consolidating the info in one place. Someone mentioned earlier they wanted to create a table of hardware versions - that hasn't happened yet but essentially there are only 4 versions and various orders of quality in construction and parts used (from what I can see). I will post a photo of the cap I added to DSP reset line on my Gecko along with links to the shields, switches and other changes, to the MODs section. HOWEVER, I don't want to be the ONLY person doing this..... My $0.02 worth
Brent DeWitt All Messages By This Member #1022 I may not understand the question but, between the S11 SWR and Smith Chart displays, the nano comes from the factory with antenna analyzer capability. Were you looking for something else?
F4WCV All Messages By This Member #1023 No, the nano comes with 3 firmware options. By default the factory set version is 4 tracks 900MHz. I want to change it to the antenna analyzer 2 track version for my friend. It has bigger fonts and a different interface. toggle quoted message Show quoted text -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Brent DeWitt Sent: Thursday, August 15, 2019 9:00 PM To: [email protected] Subject: Re: [nanovna-users] Manual I may not understand the question but, between the S11 SWR and Smith Chart displays, the nano comes from the factory with antenna analyzer capability. Were you looking for something else?
Dave Daniel All Messages By This Member #1024 There ought to ba a way to have multiple FW images resident and the to select which one gets loaded at start-up time. DaveD Sent from a small flat thingy toggle quoted message Show quoted text On Aug 15, 2019, at 15:16, tuckvk3cca <tuckvk3cca@...> wrote: No, the nano comes with 3 firmware options. By default the factory set version is 4 tracks 900MHz. I want to change it to the antenna analyzer 2 track version for my friend. It has bigger fonts and a different interface. -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Brent DeWitt Sent: Thursday, August 15, 2019 9:00 PM To: [email protected] Subject: Re: [nanovna-users] Manual I may not understand the question but, between the S11 SWR and Smith Chart displays, the nano comes from the factory with antenna analyzer capability. Were you looking for something else?
jim #1026 Simplest to a "cal" on the range you want ...also can note the "traces" you want ..save to slot 1 thru 4 (your choice) ..turn on ..recall slot ...done ...except for larger font , but ... Jim toggle quoted message Show quoted text On Thursday, August 15, 2019, 7:38:42 PM UTC, Dave Daniel <kc0wjn@...> wrote: There ought to ba a way to have multiple FW images resident and the to select which one gets loaded at start-up time. DaveD Sent from a small flat thingy On Aug 15, 2019, at 15:16, tuckvk3cca <tuckvk3cca@...> wrote: No, the nano comes with 3 firmware options.? By default the factory set version is 4 tracks 900MHz.? I want to change it to the antenna analyzer 2 track version for my friend.? It has bigger fonts and a different interface. -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Brent DeWitt Sent: Thursday, August 15, 2019 9:00 PM To: [email protected] Subject: Re: [nanovna-users] Manual I may not understand the question but, between the S11 SWR and Smith Chart displays, the nano comes from the factory with antenna analyzer capability.? Were you looking for something else?
Mike Brown All Messages By This Member #1027 My 1st Nano (yes, I do now have two - thanks for the advice Larry) came with 2-trace antenna analyser firmware. Text is clearer but the only difference on the interface I have spotted is the last of the Format options moving to a submenu. Mike toggle quoted message Show quoted text On Thu, 15 Aug 2019, 20:16 tuckvk3cca, <tuckvk3cca@...> wrote: No, the nano comes with 3 firmware options. By default the factory set version is 4 tracks 900MHz. I want to change it to the antenna analyzer 2 track version for my friend. It has bigger fonts and a different interface. -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Brent DeWitt Sent: Thursday, August 15, 2019 9:00 PM To: [email protected] Subject: Re: [nanovna-users] Manual I may not understand the question but, between the S11 SWR and Smith Chart displays, the nano comes from the factory with antenna analyzer capability. Were you looking for something else?
F4WCV All Messages By This Member #1028 Is there a way to use the Bluetooth Bluevna app with the nano. That interface is much better.Sent from my Samsung Galaxy smartphone. toggle quoted message Show quoted text -------- Original message --------From: Mike Brown <mbmail@...> Date: 15/08/2019 23:40 (GMT+01:00) To: [email protected] Subject: Re: [nanovna-users] Manual My 1st Nano (yes, I do now have two - thanks for the advice Larry) camewith 2-trace antenna analyser firmware. Text is clearer but the onlydifference on the interface I have spotted is the last of the Formatoptions moving to a submenu.MikeOn Thu, 15 Aug 2019, 20:16 tuckvk3cca, <tuckvk3cca@...> wrote:> No, the nano comes with 3 firmware options.? By default the factory set> version is 4 tracks 900MHz.? I want to change it to the antenna analyzer 2> track version for my friend.? It has bigger fonts and a different interface.>> -----Original Message-----> From: [email protected] <[email protected]> On Behalf Of> Brent DeWitt> Sent: Thursday, August 15, 2019 9:00 PM> To: [email protected]> Subject: Re: [nanovna-users] Manual>> I may not understand the question but, between the S11 SWR and Smith Chart> displays, the nano comes from the factory with antenna analyzer> capability.? Were you looking for something else?>>>>>> >>
Peter Gottlieb All Messages By This Member #1029 Be interesting to see a sealed VNA with no display which uses a phone app as the user interface via Bluetooth. Peter toggle quoted message Show quoted text On Aug 15, 2019, at 7:19 PM, tuckvk3cca <tuckvk3cca@...> wrote: Is there a way to use the Bluetooth Bluevna app with the nano. That interface is much better.Sent from my Samsung Galaxy smartphone. -------- Original message --------From: Mike Brown <mbmail@...> Date: 15/08/2019 23:40 (GMT+01:00) To: [email protected] Subject: Re: [nanovna-users] Manual My 1st Nano (yes, I do now have two - thanks for the advice Larry) camewith 2-trace antenna analyser firmware. Text is clearer but the onlydifference on the interface I have spotted is the last of the Formatoptions moving to a submenu.MikeOn Thu, 15 Aug 2019, 20:16 tuckvk3cca, <tuckvk3cca@...> wrote:> No, the nano comes with 3 firmware options. By default the factory set> version is 4 tracks 900MHz. I want to change it to the antenna analyzer 2> track version for my friend. It has bigger fonts and a different interface.>> -----Original Message-----> From: [email protected] <[email protected]> On Behalf Of> Brent DeWitt> Sent: Thursday, August 15, 2019 9:00 PM> To: [email protected]> Subject: Re: [nanovna-users] Manual>> I may not understand the question but, between the S11 SWR and Smith Chart> displays, the nano comes from the factory with antenna analyzer> capability. Were you looking for something else?>>>>>> >>

Previous Topic Next Topic