开云体育

Can anyone confirm that the above 900 MHz there is actually RF being output from the CH0 connector... i.e. use a receiver or spectrum analyzer to observe the RF?

YES!! - You da Man, Bryon! You've added just about everything that was missing from the menu - FANTASTIC! Thank you very much. ORISTO - with this release of alternate firmware, might you be able to

RFpro, Firmware 10KHz-1500MHz. By default, when turned on, 50KHz-900MHz. Expand the boundaries in the frequency setting menu. Added dfu menu item, now it is not necessary to close the jumper with

Herb, I blush. Thank you very much for your appreciation :-) -- Rune / 5Q5R

Hi Holger, For each of the standards, you first need to sweep them in the main window, then press the corresponding button in the calibration window. This allows some more control over what area you

Hello Rune, thank you for your work. I had trouble with the calibration Routine. Doing the calibration procedure for open, short, match, isolation and trough and save the results. i can recall them

Rune, I just took a look see at NanoVNA-Saver 0.0.9 and I'm very impressed with all the improvements you have made in just the course of a month. Your efforts are especially noteworthy since you have

It's Friday, and that apparently means NanoVNA-Saver 0.0.9: https://github.com/mihtjel/nanovna-saver/releases/tag/v0.0.9 This edition has focused a lot on the markers: You can now pick which marker

I have an SO-239 to SMA male adapter for my SpyVerter up-converter. Somehow, I broke the SMA pin off in the SpyVerter SMA female connector. While troubleshooting the problem using an SMA male-male

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the [email protected] group. *File:* NanoVNA Jog Switch

Jerry, I stay away from Chinese connectors because of questionable quality and use Amphenol 132171 M to F adapters. Here is the mouser

No

Hi Ron, So (you probably know this) if you want to lower the resonant freq of your antenna you need to make it longer. There may be an inch or so of adjustment if you loosen the set screw at the base

To Erik, Hugen, ttrf (de facto code "owners") *The Command Stability Issue:* Some people have reported some stability issues with the usb command interface, including the screen going white. I have

I'm new to the group. Do I have to use special firmware in the nanaVNA to use the TAPR application? Mike N2MS

Do you have any references to this? It is certainly not the effect I meant. I am talking about something quite different. I will have a play later today with my 4284A LCR meter (20 Hz to 1 MHz) and a

problem solved by David F4HTQ https://github.com/mihtjel/nanovna-saver/releases/download/v0.0.8/nanovna-saver-v0.0.8.exe a better software than the ones proposed by sellers Tks David 73's John

My grammar was poor. If you are working at 1 MHz, where the wavelength is 300 m, with a coaxial short having a physical length of 15 mm, then the short is 0.00005 wavelengths long. The maximum amount

Hello, I am John F5VLB, a new member, from France. My nano vna is working well except it does not send the measured data to the PC. I can get data when I click on the button, but I receive only the

Or use the DeepL translator, which usually produces better results than Google. https://www.deepl.com/en/translator