开云体育

/g/nanovna-users/files/NanoVNA%20PC%20Software/NanoVNA-Saver/nvna-s-pve-rev-b.pdf - typos fixed.

On Mon, Jan 20, 2020 at 08:29 AM, Alan G3XAQ wrote: " None of this seems to tell me which hardware version I have received. I've trawled the messages on here and can't see how to find it. "

Well, I did the component changes on my version 3.3 to version 3.4 NanoVNA-H (resistors only). Using my 4 point precission LCR measuring device I measured @ 10kHz? directly on the connectors, VNA

I just had contact with Maggie less then 3 hours ago, and made payment via paypal. Also she sayd its CNY overthere so will be at work again for shipping the goods February 4

The file is there: /g/nanovna-users/files/NanoVNA%20PC%20Software/NanoVNA-Saver nvna-s-pve-rev-a.pdf

OK, Here is the full link: /g/nanovna-users/files/NanoVNA%20PC%20Software/NanoVNA-Saver Folks, When uploading files, please try to NOT use spaces in the filename. Use dashes,

I will test this when I will be home tonight. But this seem to be a very good solution. Pierre VE2PF

Hold down the Alt key then left click, drag the window. HTH Nick G3VNC

Just uploaded into Files/NanoVNA PC Software/NanoVNA-Saver/nvna-s-pve-rev-a.pdf. Documents a no compromise fix for the pyqt5 installation problems recently reported by many users on various Debian

nanoVNA-H4 (using STM32F303CCT6 and 4-inch LCD) arrived today via UPS. Now we need to study and understand the differences compared to the previous version. -- *73, Lucio I0LYL Rome, Italy*

Hi Hugen Just got the NanoVNA-H4 delivered to day. I have some issues which I have raised to the manufacturer as the USB C entry is blocked by the upper half of the case (a rim is not milled away).

Just open it up - its only 4 screws. You will see the board version on the PCB and also will see if D2 is installed or not. Mine arrived a few days ago. PCB is v3.3 and the firmware was dated November

Hi Alan,You most likely have hardware version 3.3 which is OK. V3.4 is the latest and that came out in Dec. You should update to the latest firmware that came out over the weekend. Please review the

Hi Gyula Eric provided the solution, I was basically saving and reusing my existing firmware, but all sorted now, so thanks to all for your help. Dennis G8IMN

Hi Eric, Thanks for your experiments to improve the nanoVNA. And buy some flux remover to clean up the mess Reinier Op 20-1-2020 om 17:31 schreef erik@...:

Not sure why you created a rtf file for the screenshot, the result is poor quality, the details are unreadable.

Just for reference the locations of the resistors you have to change -- NanoVNA Wiki: /g/nanovna-users/wiki/home NanoVNA Files: /g/nanovna-users/files Erik, PD0EK

I got a Nano-VNA-H off eBay for Christmas. It has a black plastic case with a Q-code on the label that just seems to contain nanovna.com according to my iPhone. The label also has a serial number

I've been checking my coax using NanaVNA Saver 0.2.2-1 on a NanoVNA-H with Hugen 0.4.5-4-g96e7efe firmware. I have a piece of 75 ohm Commscope F-11 coax going to a junction box in the yard, I believe

Nick, I have a "beautiful" Flat Screen Sony, it was a Christmas gift from a dear lady friend. Back when LCD flat Screen Monttors were $250+. I was living in New England and left there 14 years ago. It