开云体育

On Mon, Nov 18, 2019 at 08:22 AM, Dr. David Kirkby, Kirkby Microwave Ltd wrote: "Is BH5HNU Hugen? I thought Hugen was working on nanoVNA-H, and BH5HNU on nanoVNA-F."

looks like edy555 has released version 0.5.0 as of the 17th... https://github.com/ttrftech/NanoVNA/releases.

Hi Conrad, nice to meet you here so I guess I'm the 1. and you are the 2. 144MHz EME guy in the group :-) I was lucky to buy 3 pieces of the -F version before he closed the shop but you may have read

Is BH5HNU Hugen? I thought Hugen was working on nanoVNA-H, and BH5HNU on nanoVNA-F. Dave. Dr. David Kirkby, Kirkby Microwave Ltd, drkirkby@... https://www.kirkbymicrowave.co.uk/

Forgot to attach the link: https://www.amazon.com/gp/product/B07YYMDLPR/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 Hope this helps 73 Greg/W4GAP

I got mine from Amazon. The reseller is Nooelec....

https://www.aliexpress.com/item/4000194209537.html?spm=a2g0s.8937460.0.0.3af12e0eVuqzk2 -- *73, Lucio I0LYL Rome, Italy*

Maybe here Conrad? https://www.ebay.com/itm/NanoVNA-F-Vector-Network-analyzer-HF-VHF-UHF-Antenna-Analyzer-Standing-Wave-/254362377331 73, Drahos Dne po 18. 11. 2019 16:52 u?ivatel Conrad, PA5Y

Hello all, I was going to place an order for the NanoVNA-F today and the link that I have for the BH5HNU version is down. I would like to buy from a reputable source and I know that huygen is the

#78: on the measurement of s-parameters using the [LeastVNA] only - 12 November 2019 - /g/nanovna-users/message/6912 - Hello, Allow us, please, to inform you that we just uploaded the

450mAh is... Not suitable for NanoVNA 1. Stand-by draw 2. Charge circuit pushes over 1A( over 2C rate ) My battery already swelled( PCB/LCD curved slightly )

Fine under Ubuntu 19.10 and Mate desktop. Also never could get it to run under XFCE4.

On my Mint system there was a 3.7 lite package that would install alongside 3.6 and leave? 3.6 as the default version.? nanoVNA-saver worked fine with that package and it didn't mess up other python

Works fine here on Linux Mint 19.2 amd64 with python 3.7 per instructions here... https://github.com/mihtjel/nanovna-saver Note nvna-s requires python 3.7. Not earlier versions. Looks like some good

Doesn't work on my Linux Mint 18.3 cinnamon with Python 3.6. Python has to be updated to 3.7. I tried that before, but other apps stopped working then. So I rolled back to 3.6 Carsten

This is the VNA I am working on. It has the EU1KY bridge (based on a RF choke) and not the divider bridge. Among its advantages is that it directly samples the IF signal on the clock so that a high

The most recent version of nanoVNA-saver runs fine on Linux Mint 19.1 Cinnamon.? Most development tools are available for everyone.

There is another way to skin the cat so to speak and measure these non resonate high (or low) Z antenna. That is to say an antenna not near 50 ohms. Consider going through the effort of constructing a

Hi Oristo My comment regarding about "waste of time" regarding S21 measurements was solely based on how to save a S21 sweep and convert it from transmission to reflection. There are other option which

I am using it on Linux Mint Cinnamon 19.1 NanoVNA version 0.2.0 and it works fine. Dave N2VUZ