开云体育

Thank you.

Hi Starsekr and others Pay special attention to Part III. Part I and Part II are describing out learning process. The toroide measurements are "handicap'ed" by the wire loop inductance which you only

Hi All Some years ago I bought a N male clone calibration kit which is a HP85032E clone kit. It is not that bad(pretty good) and data are very close to what can be found on the Agilent homepage. To

I agree....... my NANOvna and my Antuino sit there unused because my old brain and the fact that my medical education didn’t cover electrical or RF engineering I am hopelessly lost in using these

No nanoVNA can only work with internal reference, not external

Or get $1 4:1 baluns https://www.ebay.com/itm/323251474048 .. and solder into hacked attenuator 2x4 https://www.ebay.com/itm//123879478099

there is misspelling, you can find it on ebay for 3 USD. You can use 450 ohm SMD resistor for testing. SMD resistors works good on HF

the link you provided is very expensive. This balun can be found fo 3 USD on aliexpress and for 6 USD of aliexpress. Some time ago their price on aliexpress was about 4 USD. In order to test it with

W. Reeve, T. Hagen, K. Poulsen published some data from and described their techniques of measuring ferrite beads in "Radio Astronomy Magazine" in 2013. They did a lot of work developing test fixtures

I guess I'm having too much fun and running out of steam. :-) I didn't miss the X-axis labels after all. They are just positioned where Y=0 and I didn't spot them.. -- 73 Gary, N3GO

Good morning GIN & PEZ; I completed my spreadsheet sufficient to make the data comparisons of the DERDEI calculations versus my NanoVNA (attached), The results overlay precisely; and therefore track

Thank you for the link.The NanoVNA-F seems like another great device, but the larger screen is just a small wish, I'll keep the 2.8" for now. I more or less tried to make a point that it is not

/g/nanovna-users/files/NanoVNA%20PC%20Software/TAPR%20VNA/VNAR4.3.zip Hi Erik I have latest dotnet and vc++ on W10 32. 2 nano's Huygen 0.2.3 and DMR 2.5.5. Both same issue; Start

NooElec made a small 1:9 balun attachment for SDR radios, it might be a good framework for test jigs or hacked to change the transformer to 1:4 or even a 50-75 ohms style using a very small binocular

gin&pez@arg Let me start by first informing you that I have successfully ran your BBC Basic Program, seeded with the raw data from my NanoVNA; and your program yields results that are consistent with

Thanks, I'd forgotten that. When I last checked, it did not seem completed. My Python hack works well enough, to proceed with experiments now and later circle back to C#.

I mostly use the email feed to keep track of all the posts. -- Paul Brodie techo@...

Oristo wrote: …. was planning to use C# because experience and less baggage on Windows, __________________________________________ If C# is more up your alley then the reversed engineered CSharp

First, I did not know enough Python to easily sort that, was planning to use C# because experience and less baggage on Windows, but Rune provoked me to try Python, and his was easy to hack:

Not sure what is meant by guidelines, but on the device, after setting FORMAT SWR, then BACK to SCALE, set e.g. 0.5 SCALE/DIV and REFERENCE POSITION to 1