开云体育

Kirk No, I did not record them because I wanted to encourage questions/comments and when you record these sessions, (some) folks are hesitant to ask questions or respond. Barry

Hi, Barry, Did you happen to record those previous sessions? Thanks, --Kirk, NT0Z My book, "Stealth Amateur Radio," is now available from www.stealthamateur.com and on the Amazon Kindle (soon)

The “Five County Digital Training Net” (Philadelphia region) is hosting a series of Zoom Workshops on Monday evenings at 7-9 pm. The topic: Nano VNA Fundamentals All are welcome to join. Link:

Sorry ... I meant to say: These parts are designed for turning on MOSFET gates so I suspect they stack as many photodiodes in series as they need to get the required voltage. Eamon

Here's one that will do 10V https://www.vishay.com/docs/84639/vo1263aa.pdf (it's far from the only one). These parts are designed for turning on MOSFET gates to I suspect they stack as many LEDs in

Apparently, those 1000V PIV (the 1n4008) *are* PIN diodes - something about the voltage rating - the 800V versions are not. However, there's some commentary about different manufacturers being

Miro, yes, Elecraft uses such high voltage rectifiers as PIN diodes in several of their products. They use true PIN diodes in some others, and sometimes they even mix them. What kind of diodes they

Hi, as written just around the corner /g/tinysa/topic/tinysa_remote_py_python/94944540 there's a new tool in my toolbox:

Dave - LogMag for S11 just sits there at 10db/0.05db no matter what connector i put on the unit, OPEN, SHORT or LOAD. It doesn't fluctuate at all. Smith Chart stays at -133mOhms 521nH. No fluctuation

Tom - I've ordered a couple to have on hand. Will take the one out. Thanks for the suggestion. John

Doug, i checked all the cables and popped the lid and checked inside for a cracked solder connection possibly. Took off the shield and checked that also. No problems that I could see. Thanks for the

Hello, The PDF file works fine for me also. Maybe you need to download it again? Clyde KC7BJE

Mutiple parties interested. So for now spoken for... THANKS! Great not to send to the landfill.

Paul, thanks i tried this; was able to see the device in the DeFuse and it completed the update but the machine still acts like its in DFU mode.

tried this today and it did not fix it.

If you own or still use the ol HP 65/67/41C series RPN machines, I have a copy of Medleys microwave routines text. Routines include analysis and synthesis of networks driven by S data. If interested,

For me too Opens fine Dg9bfc sigi Am 11.11.2022 12:57 schrieb "Max via groups.io" <kg4pid@...>:

Power MOSFETS are specified in terms of max Rdson. At high frequencies one must also include the drain/source capacitance as well as gate-drain and gate-source capacitances. Spice models typically

Is this saying that they use 1N4007/5408 as PIN? If so, any details?

It opens fine for me. Max