开云体育

Please show us the list of COM ports listed in the Windows 7 Device Manager after plugging in the nanovna. It may assign a different number than you expect.

Roger, Appreciate your assistance. Well, it seems that my COM10 port./driver has disappeared and only COM1, COM2, and LPT1 were left behind. I followed your link to the Box validation, obtained an

Here is a link to the WIN 7 and WIN 8 drivers for the NanoVNA on my Box drive. Download button in upper right hand corner. (Note: These are NOT the DFU drivers required for updating

NanoVNA app is not seeing your COM10 from the NanoVNA. I think you reported this with Putty as well. I suspect Saver will have the same issue. I believe you are using WIN 7. The problem could be

"You select the COM port from the drop down list..." OK..how about this? (See attached.) -- William, k6whp -------------------- "Cheer up, things could get worse. So I cheered up and things got

If you use the latest publicly available version of the DiSlord NanoVNA-D v1.1.00 firmware and calibrate in the NanoVNA-App-v1.1.209-OD10 it will use "raw data" from the NanoVNA. That means that

If you want to use NanoVNA app you have to be using a recent version of the firmware (last year or so). The reason is that NanoVNA app uses the binary (not ASII) transfer protocol to transfer data.

You select the COM port from the drop down list. Then press button below to Connect. You need to select where calibration is done from the drop down list. You can transfer Stimulus range settings

Yes indeed, thank you. Stunning app. How does one specify COM10 -- which is what my NanoVNA uses? -- William, k6whp -------------------- "Cheer up, things could get worse. So I cheered up and

..well, figured out how to flash the firmware with the app and, thanks to help here, I was able to do a cal first in order to make the new firmware retain the config I set up. My original goal is to

Thanks, Roger! ?n lun., 16 mai 2022 la 19:29, Roger Need via groups.io <sailtamarack= [email protected]> a scris:

A very useful PC application for the NanoVNA was developed by One Of Eleven as an alternative to NanoVNA Saver and other earlier programs. It was originally done for personal use but was kindly

William, I will answer your second question: You can find a lot of information about the upgrade in the forum wiki and you can also visit my website where I try to gather current information. --

Rich, BINGO! Thank you! ..I'm off on my journey -- beginning with RTFM. Wish me luck! -- William, k6whp -------------------- "Cheer up, things could get worse. So I cheered up and things got

Your unit is a NanoVNA-F model. Try sending your query to this Groups IO [email protected] *Clyde K. Spencer* <sim31_team@...> wrote:

Here is My attached Photo

It may be that a calibration is not stored in memory 0, so when the unit starts, it starts uncalibrated, and that could cause a display with a lot of unusual activity. Could also be that the device is

Yep. Del the ini file. "In order to get faster sweeps the display was frozen on the NanoVNA" I guess I have a second or two here and there... ;-) I am not bothered by sweep speed. I appreciate faster

Didn't work for me, per email nVNA-H4 v4.3_MS, firmware 1.1 , Saver 0.4.0, and your mod Yep. That

Not fond of "inconsistencies" here...but I see the point you make... Problem for me is what I described in my email...the out-of-sync nature of the Manage dialog and its unpredictable (to me)