开云体育

The slug looks fine when I removed it and examined it. The finish is intact and all the threads seem OK. The Capacitor is seperately mounted on the PC board right next to the RF transformer can. I

sweep being done with the slug centred, the parts inside the can and the can mounted on a p.c.b. plane? +++++

I am not really sure about the failure. It happened when I pushed the PTT switch. The clue was that the output of the RF amplifier into the tuned circuit (primary of the transformer and the 5 pf

John, yes, you can use the NanoVNA for measuring the resonant frequency of your transformer with that capacitor, and for measuring the inductance. But you need to be aware that in VHF circuitry, using

Hello Jimmy! FW from ojisancoubou works very good, but you can not become the screen capture in program NanoVNA-APP. Vladimir

Hi there Vladimir! I was able to correct the issue with my NanoVNA-H white Gecko, I found out that the calibration set including the feedline cable was so horrible. The 50 Ohm load came with it is not

There is nothing wrong with the NanoVNA from R&L it works great, built stout and the N-connectors are a nice addition.. Here is something that you won't find on that V2 group...

I have a VHF transceiver failure traced to a RF subminiature slug tuned RF transformer that failed. I took it out and am going to rewind it. I know from the schematic the parallel capacitor value (5

Dave--How does it work standalone? Try it on a crystal or something simple like that. If it seems to work as expected, an error connecting via USB is to be expected as well--that is, it would hardly

Please refer to the various user guides in the forum's files section, specifically the beginners guide.? You're not seeing anything on your PC because you need the correct usb drivers installed for

Hi, I logged in a while ago and I didn't know if I'd bought a bad clone. I now think I may have done. :-( The unit came today in a well padded box, but the valuation in the paperwork was very low,

I was able to convert the bin file to DFU. You need an offset of 0x8000000 applied to the bin file prior to converting. It's an interesting build BUT please remember - the author states there's bug,

The way you reset back to defaults is to connect the Nanovna to a serial terminal and run the ??????????????? clearconfig 1234 command

So is scale. reference position and electrical delay saved? As I'm learning and tinkering with settings I'm not sure if there is an easy way to reset back to the defaults.

Sorry, correct download link: https://ojisankoubou.web.fc2.com/nanovna/download/ch20200823test.bin I have tryed to convert BIN file to DFU file with DFuSeDemo - negativ. Vladimir

Hello Sean! Please reed here over the White NanoVNA remodeling and fw: http://ojisankoubou.web.fc2.com/nanovna/index.html Please use Google Translate japanese---english His FW is very different from

Great way to charge? the battery

I find it here: https://github.com/nanovna-v2/NanoVNA-QT/releases Von meinem iPhone gesendet

I am not so sure if this was a legit copy or it's just a bad clone. I tried all firmware from edy555, Dislord, Hugen79, qt, and tinysa (complex) and tried to measure clone copy of diamond antennas and

Folks, I think we have exhausted this off-topic topic and would ask that everyone cease posting using this thread. since it hs nothing to do with the nanoVNA.. Thank you. DaveD, co-owner -- This email