开云体育

I could run it on my Alienware in the house and get it to start up quicker (if not exactly quickly, I'd guess)...but...I'm happy enough with it on the shack PC. Yes, it takes a minute or two to start,

Is the PC software set (seeing, connecting) to the correct port number? Did you use 'Device Manager' to find the nanovna's port number? -- Doug, K8RFT

Back in 1982, my Atari computer loaded and started programs faster than that - from cassette tape! :-)

I installed the 2021-01-30 version for my H. Huge improvement, thanks again, Gary! [email protected]> wrote:

Hi Gary, much appreciated!

Install the latest hugen79 firmware, it has text suze like the tinySA. Gary W9TD

Yes, that's normal. I see it every time, too. Let it finish loading, and it will work. -- Doug, K8RFT

I don't know if this request has ever come up, but I find the text on the menus difficult to read, whereas on the TinySA, it is much easier to do so. My eyes are not what they used to be, so I was

You do not understand the significance of " in "original"?

No wrote:

Guide here: https://github.com/ylabrj/NanoVNA_Load_Windows10 Download Firmware Releases here: https://github.com/ttrftech/NanoVNA/releases

LOL thanks I had completely forgotten that! Been too long since I frequented the forum.

nanovna-H is the "original" Nano

The only Dislord firmware folder I see in the file section is for nanovna-H & H4. Are those usable with the orginal nanoVNA?

Dislord firmware, browse the file section.

I bought a couple of the original nanoVNA devices in the fall of 2019. Shortly thereafter, I upgraded the firmware for one of them to a newer version that came out with a higher frequency limit (1500

My understanding is that the OTG cables have a resistor connected between pins 4 (ID) and 5 (GND); IIRC 0Ohms enables the OTG host function and 124kOhms enables OTG host plus charging capability. 73,

How 'bout here: https://github.com/OneOfEleven/NanoVNA-H/tree/master/Release

I am looking now answer soon I hope

How do I find the OneOfEleven app? I have the 3.8 Saver on a PC and it runs, and it sees my Gecko plugged in, but it won't connect. Hmmm? Bear W5VZB