开云体育

Hello, It is not my PC. I am running a DELL Inspiration with a AMD RYZER 400 series 7 CPU with a 512Gig SSD with the latest Windows 10 with all updates. Nova saver is the only program I have ever had

Larry, Thanks. I don't know how to compile this code and there is a bit of a learning curve so I will wait for the next release. I am happy with 1.0.45 Roger

Mine hangs on the DOS screen if it doesn't find the nanovna. Try unplugging the nanovna and plugging it in again before starting nanovna-saver. Gerald Pelnar WD0FYF -- This email has been checked for

I'm using a Toshiba laptop, Windows 10, AMD A8 processor, 8GB ram and all I got was just a windows command prompt window with a blinking cursor and no text after about a minute. I guess I haven't

I have a 7+ year-old HP Pavillion desktop with an Intel I7 CPU. My NanoVNA-saver.exe (NanoVNASaver.x64) loads in 14 seconds. I do have 256GB SSD as drive C: which helps a lot on this old machine. --

Wonder if it's related to your PC performance? My W10 HP? Envy with SSD takes 10 seconds to display the windows screen and that's awhile compared to other apps. Absolutely no question in my mind that

It takes about 1 to 2 minutes to actually start on my Windows 10 machine. Until then, all I see is a screen that looks like a dos screen. I have reinstalled every copy of the program I could find,

Roger, It's in Dislord's GitHub repo. You have to build it yourself as I did last week.? (Ignore formatting numbers): ? ? ? ?Commits on Feb 24, 2021 - Add |Z| trace mods - DiSlord committed 11

Use DiSlord's 1.0.45 in the forum's file section. There's a version for H and H4. Choose the correct vers for your device.? On Sun., 7 Mar. 2021 at 12:02 p.m., J P Watters via

Andreas, Where did you find the repository for DiSlord 1.0.48? What are the changes from 1.0.45? Roger

The TDR function is in most versions of the firmware. It is implemented using an FFT from the frequency scan, so it is a 'calculated' or 'simulated' TDR, with some related limitations. There are

Message editing is disabled in this group. On purpose. DaveD, co-owner -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

The ability to send the edited post or not is only available to moderators with the proper permission or to owners of groups. Dave - VE3HTC / VE3DTR

I saw an message that made me think that there is a TDR function available for my NanoVNA-H v3.4 Can someone point me to this firmware? ..jpw J P Watters KC9KKO Morris, IL USA

Hi Larry Yes! That was the answer. It now calibrates with both programs and the results are the same both with the Windows programs and compared to the NanoVNA itself when used on its own. I watched a

you made measure on Bandwidth 4k, old firmware work on 1k by default (need set to 1k as minimum for compare) Old firmware measure on 8mA by default (but this give not linear results on long span

I belong to numerous other groups and none of those with message editing turned-on have the option to "Save without sending". All I see is "Save and Send", "Cancel", or "Delete". That must be another

I updated the firmware, then I ran "clearconfig" as the next step. Then I went through the calibration, starting with resetting the calibration as the first step (as per the regular calibration

Did you press Reset or to calibrating? When updating firmware, do you run the clearconfig 1234 command prior to recalibrating? I have noticed that on my NanoVNA-H v3.4 the latest FW versions things

John, Did you clear the memory immediately after flashing? Use the command console using putty or teraterm and run the 'clearconfig 1234' command then recal your touch and RF on the device On Sun., 7