开云体育

On Fri, Sep 4, 2020 at 08:06 AM, @switchabl wrote: It depends. The problem is that adding an attenuator at the test port will degrade the (raw) system directivity by _twice_ the attenuation value. So

The software of the SAA2 has an option to adjust the power. I have not tested, if it really works. -- Klaus, DL5KV

Offtopic by this point but: There is probably something wrong with the settings at your store as the Aliexpress standard shipping is available for Albania, Macedonia, Bulgaria, Romania, Hungary,

On Fri, Sep 4, 2020 at 07:49 AM, Russ@va3rr wrote: Has the case been modified to allow outside insertion of the micro SD (TF) card? I added the card reader to my H4, but I'm debating modifying the

It depends. The problem is that adding an attenuator at the test port will degrade the (raw) system directivity by _twice_ the attenuation value. So while in your case it works fine, if you were to

Hugen said in his mesg that the case has not been changed yet.It's no big deal to cut a slot - only on one half of the housing - you can nibble away with small sidecutters and trim with an exacto

Has the case been modified to allow outside insertion of the micro SD (TF) card? I added the card reader to my H4, but I'm debating modifying the existing case, or trying to order a new case from

Yes, we installed microSD for the latest nanoVNA-H4 after DiSlord completed the microSD migration. Since we have not completed the modification of the shell mold and have not reserved an installation

On Fri, Sep 4, 2020 at 06:38 AM, Bob M. wrote: .. Are there any NanoVNA products, of any version, that have an adjustable Port1 output level? ===================================================== Bob,

Igor Jobim posted on another group that a friend had recently received a NanoVNA-H4 from hugen's shop. He included a photo of the pcb board it it showed that the NanoVNA-H4 his friend received had a

Are there any NanoVNA products, of any version, that have an adjustable Port1 output level? My V2 unit's output is -10dBm and while that's great for working with passive networks, it's a problem for

Designing the cases required several nights of hard work and design choices has been done in order to : - Accommodate a large enough battery and internal stylus fitting - Have no visible screws on the

Keysight "RF Microwave Signal Chain & Network Analysis" webcast added to External links: /g/nanovna-users/wiki/13116

Dragan Milivoevich Meggie sent your letter to me. I understood that this was a mistake.

On Fri, Sep 4, 2020 at 12:40 AM, Hugen wrote: Yes, they use the same PCB manufacturing. From: Ash Date: 2020-09-04 15:35 Subject: Re: Re: [nanovna-users] SAA2N reviews Thanks Hugen. It is SMA, does

Yes, they use the same PCB manufacturing. hugen@... From: Ash Date: 2020-09-04 15:35 To: hugen@... CC: nanovna-users Subject: Re: Re: [nanovna-users] SAA2N reviews Thanks Hugen. It is

Thanks Hugen. It is SMA, does the VNA have the same RF characteristics and performance verification as the N type version?.

Yes, this is Maggie's shop. hugen@... From: Ash Date: 2020-09-04 14:56 To: nanovna-users; hugen Subject: Re: [nanovna-users] SAA2N reviews Hi Hugen, Is this your product?

Hi Hugen, Is this your product? https://aliexpi.com/WNTK

Here is the figure from Carter paper (1932). Piero, I0KPT