开云体育

Thinking that I'd prefer the display the other way around for field work...that is, the display is upside down in one of the images where the N fittings are at the top. -- 72/73 de Rich NE1EE On the

On Sat, Aug 1, 2020 at 10:24 AM, Hugen wrote: >I dont see > support paypal payment >

N-type allow 11 GHz Also more durable PS for my work better use N-type connectors, all devices have it, also all my good calibration kits for N-type

Hello all, Thank you Gabriel for sharing this info, the two port VNA is on top of my list with most wanted RF measurement stuff - I will watch you :) -- Regards, Slawek/SP9BSL

As far as I know the SMA connector is better up into the several GHZ range than the N-Type ? But yes the N-Type is GHz good.

0.1.40 looks cool!! :) Stable so far, no beeps - here H4, stock load, win10.

Yes you're right Igor, I've done a temporary rename. I'll separate out the R+jX I think to it's own graph. As is it's a bit cluttered with three curves on one graph, difficult to tell what's what.

Well, I've found a major problem with the comms that would definitely have caused this pausing problem, so I've just fixed that. Now on v0.1.41

A good option. But it was necessary to make a variant with an adapter, since not everyone needs an N-connector and the board itself has little rigidity. Time will tell.

@OneOfEleven: it is my current understanding the "R+jX" graph (I miss) is actually the "Series RLC" one. I would suggest to rename it "R+jX" graph for clarity.. (or add the R+jX" one into the

Hi DiSlord, I must be very lucky, but can have my H4 on for ever, it keeps cool, don't know why, running your latest firmware version 1.03 beta new UI, 192k ADC, Build time Jul 26 2020 -22:32:03,

Version 0.1.40 does not freeze. Works great! Thank! OneOfEleven

N-connector? How many did not like the SMA connector? I do prefer the SMA connector. I have been working pro doing type approval for more than 30 years and when it comes to quality connectors for high

I did the same also on Mint 19.3 (64 bit) and it worked just fine, just a couple of days ago. However, part way through the instructions, the example command line prompt changes to a single '$'

Personally, I think the Nanovna has it right by offering both ASCII and binary output in a similar manner to that of the old Motorola oncore GPS modules.? Going forward, any newer versions of the

There is no innovation, just a new shell. Since this group has been dissatisfied with the SMA connector and the 2.8-inch display, we installed the N-type RF connector and the 4-inch LCD on the

My fix for the negative SDCARD frequencies: https://github.com/igor-m/NanoVNA/commit/c7aaa48d089c027248311fc4ff0673d62c98104c

I add printf fixes to git (for save s1p and s2p file), or exist another bug?

It depends on the chip (the datasheet max is 200MHz), mine works "stable" at 321MHz (H4).

Yes, it is H4, dislord's version from 17.7. (pre 1.0.0) with my fix for freqs > 2^31 bug. I.