开云体育

And what about R13?

Latest should run. Just try. Even if the nanoVNA bricks you can always force it into dfu mode with the dfu jumper and restore a previous firmware -- NanoVNA Wiki:

After HW version 3.3 of the 2.8" nanoVNA Hugen developed two products: - 2.8" version 3.4 PCB - 4" version with ?? PCB Are you saying his latest software version, 0.4.5-4, compiled on January 18, 2020

Hi, Thanks for adding me to the group. So I received my NanoVNA-H on Friday. Today I managed to have a look at it. It comes with 'Firmware 0.4.5.1' and looks quite well built. I haven't opened up to

Congrats

Everything works fine again. Bad USB cable lost connection. I used another USB cable and the DFU mode connected (jumper). Updated and nano FW back to life. 73 !!

Added to /g/nanovna-users/wiki/Mods-and-Design-Notes

Upgrading the firmware of the nanoVNA is something that is easily done but how about the HW? Now I am the proud owner of an original V3.4 Hugen nanoVNA I dared to open my old Hugen nanoVNA and tried

Until NanoVNA-H4 (AKA HW version 3.4) all nanoVNA versions and clones can run any nanoVNA firmware (except Hugen's unique versions for HW version 3.4) I suppose that the version splash screen shows

Anyone member can add a new Wiki page and/or edit existing ones, so that is probably the easiest way to implement a document modifiable by others. So far as I know, Groups.io has no specific FAQ

I see that both eddy555 and hugen have recently released new versions of their respective firmware. My nanovna is the -H model, 2.8", HW version 3.3 Can I indifferently load one or the other of those

Hello Robert, Try: $ sudo python3.7 -m pip install . 73, Rudi DL5FA

Jim see post #9737 for a workaround. HTH

Error during the update caused problems: - Screen completely white and without commands; - Does not connect to the PC (COM port); - Does not access DFU mode (jumper); - It does not appear in the

Judging by a number of recent posts, a lot of folk are now having problems installing nanovna-saver on Debian based linux. I've identified the problem, and have written some notes on how to fix it.

I tried just running the program as suggested in post #9840. Tried everything so far that been suggested. I do have it running in windows 7, but I just despise windows. This is what I am seeing at

Hi- I've spent three interesting days updating my EeePC notebook PC's Debian Linux OS so I could install the nanovna-saver software. Finally got there and all was good until I decided to load a

Hi Dennis, I think the solution is written here: /g/nanovna-users/topic/51160730 if not, use and read the wiki description it seems to me that for the first time the lack of a driver

Hi All, had my VNA-H for a short while and decided it was time to update it, mine is board V3.3, firmware 0.2.3.2, using DFUse, I put my unit into DFU mode and uploaded the latest upgrade. As i have

Bob, have you tried running the software, rather than the install procedure? The install pulls in the dependencies - if you already have them installed, you can just run the program instead.