开云体育

Does that mean you just volunteered to write a better book?

On Wed, Jan 15, 2020 at 06:01 PM, KD8CGH wrote: " My nanaVNA-H only works with PC programs with the C to A cable. It powers up with the C to C but I can't connect to it. It seems that each has its own

I meant sudo of course. 73 -Jim NU0C "Jim Shorney" <jshorney@...> wrote:

I have it running under Kubuntu 18.04 without a lot of effort. Using the Muon package manager I easily located the proper dependencies and installed them. Installed Python 3.7 from the deadsnakes ppa.

That's it! How could I not remember deadsnakes.... I generally use the muon package manager to search for packages that I don't know the exact name of. Command line apt-get is for when you know what

My nanaVNA-H only works with PC programs with the C to A cable. It powers up with the C to C but I can't connect to it. It seems that each has its own personality.

On Wed, Jan 15, 2020 at 03:51 PM, Steve London wrote: " Why did they even go with a USB-C jack on the NanoVNA " =================================================== The USB-C jack is not polarized and

I have had issues as well.? I own two nanoVNAs.? One has had the USB connector removed due to a short.? Now I can't put it back because the pins are too small and too close together for my old

@Oristo, Hey, I got it working! I was mixed up on the two names (SimpleUsbTerminal on Github, and Serial USB Terminal on Play Store. Anyway, with the CDC device, it works the same as with my PC. Thank

Alberto, are you a member of the dialout group? If not this is likely to be the reason for needing root access. Graeme

Ahh this is turning out to be more tricky than I thought. I am using Linux Mint 19.3 which uses python 3.6. It was no problem to load the dependencies which I listed for python 3.6 but they would not

=================================== Thanks Oristo, SUCCESS AT LAST ! I installed these three packages :? python3-numpy, python3-scipy and python3-serial and then the command sudo python3.7

Obviously giggling the cable shouldn’t cause problems. Either a poor quality cable/jack or a manufacturing problem. Personally I appreciate having a USB-C connector. Pretty much all of the computers

My parents gave me my first "computer" (a Brainiac) back about 1962. I have been building and programming them ever since then. I thought Pascal was a pretty stupid language, but in all my years I

I have a NanoVNA with a USB-C connector. There is now a problem when connected to a power/data source such as a PC through a USB-C -to- USB-A cable. If the NanoVNA is on, a slight jiggle of the cable

On Wed, Jan 15, 2020 at 02:43 PM, Leif M wrote: I wonder if VNA 2.0 has a HW TDR also, or is it a SW feature. ============================================ The 3 GHz VNA 2.0 being developed by Gabriel

Hello Alberto, You will need to install the libraries explicitly for the python3 that you are using. The most likely names for the files are python3-numpy python3-pyqt5 python3-scipy python3-serial

I wonder/hope that will there be a TDR in next VNA the 2.0. Delay gives a good starting point for cable compensation, (which people here will probably know better than I)I mean the one with upper

Interesting link and I found the EM simulator link there also. I have to calibrate my VNA to 900MHz maybe I get better results then. I wonder if VNA 2.0 has a HW TDR also, or is it a SW feature.

Sounds tantalizing Glen, Dale W4OP