开云体育

Sorry, after having rearranged my text, some not meant to send text had remained below 73, Hans DJ7BA Sorry, please ignore this remainder. Von: DJ7BA <dj7ba@...> Gesendet: Freitag, 10. Januar

Hi Jim, yes, once you got started using SimSmith, you will not want to miss it anymore. It is the perfect companion of NannVNA and NanoVNA saver or any VNA. You can not only “measure resonance from

Hi Luc, Could you please show me the link for the english translation of your presentation? I can not find File Section on your website. Regards [email protected]> wrote:

Test field 8 is a series LC. Hence at DC this is an Open. It most have a trajectory that rotates CW and cross the short side of the chart at the series resonate point. There after the Z must be

Just to be clear, you are saying that the vna gives an insertion loss that is different than what the SA TG provides and the difference is as much as 2- 3 dB?

There is a 2 to 3 dB difference between what the spec an says and the nanoVNA. I know the spec an is good as it is calibrated.

Is there a difference in S21 after thru calibration using a direct cable between CH0 and CH1? That should not be as the thru calibration should normalize S21 -- NanoVNA Wiki:

Hello Klaus, It looks like, tha we have slightly differen PCB layouts. My PCB layout was posted in number 9245. 73, Rudi DL5FA

Hello Klaus, I am glad that your RF Demo Kit now works as it should. I think it is mainly for learning, and not for every day work. 73, Rudi DL5FA

Thanks for the replies! Actually My spec an has a tracking gen which I normalize. I noticed after doing a cal on the nanovna and nanoVNA F that there is a 2 to 3 dB difference in the measurement. Used

Sometimes the 'scale' function needs to be reset to 1:1. Bob

From: Robert E. Gross Where can I get better manual or instructions? ========================== https://www.amazon.co.uk/guide-NanoVNA-Christoph-Schw%C3%A4rzler-ebook/dp/B083BB82G5/ David -- SatSignal

This is correct. 8 contains a series capacitor. This is an isolator at low frequency.

Quite right, whatever impedance but no signal in on CH1 will show 50 ohm. Thanks. /Torbjorn

Yes. The other ones are OK.

Hugen - Nice work. I am looking forward to working with the improved version. On the alibaba page, the four inch model is the more expensive of the two listed, correct? Cheers, bill

50 ohm on CH1 means no input signal to CH1 as expected -- NanoVNA Wiki: /g/nanovna-users/wiki/home NanoVNA Files: /g/nanovna-users/files Erik, PD0EK

Colin, What You see in blue on the screen is the CH1 Smith Chart and the value off 50 ohm is to best of my knowledge the input impedance of CH1. Switch to Channel 0 reflect and the marker will jump to

Hi Hugen, True, it was sold as an original with the latest software. I soon realized that this was unfortunately not entirely true :-( This was before I discovered this forum and read that there were

From https://github.com/hugen79/NanoVNA-H/tree/F303 Quote..... "NanoVNA is a very compact and portable vector network analyzer created by Mr. TAKAHASHI Tomohiro(edy555), which cost is very low. It is