开云体育

Hi Gabriel You are right it is a matter og software and for that matter firmware. As the NanoVNA is presently it does not have facilities embedded for neither calibration kit data and full 10/12 term

@ Gary O'Neil, N3GO - 8 December 2019 /g/nanovna-users/message/8024 Dear Gary, Once again, we thank you for your time. You are right. Yes, this is indeed an endless,

Hi Eric A 10dB att in the Ch1 path will not cure the problem as you also have a (invisible) mismatch in the Ch0 sourse impdance as well. So two attenuator might give some further improvements. But it

I've deliberately chosen not to rely on scikit-rf in NanoVNA-Saver. Library reliance is kept at a minimum, and figuring out the mathematics behind the calibration was part of the fun of writing the

Kurt, It appears (in my limited understanding) the poor matching to Z0 of CH1 (port 2) is the biggest reason why the T-check is not performing well on the nanoVNA. Would you agree that using a 10dB

Stylus: Guitar pick works also STX VHF/UHF Rover

I find metallic works well.

i use a pen cap or a tooth pick its a resistive screen so anything pointy and non metalic will work even a #2 pencil

Photos? On Sun, 8 Dec 2019 at 1:49 PM, Nulluser00@...<Nulluser00@...> wrote: I mounted my NanoVNA on an Budd aluminim cast box and use male SMA to male SMA to a female SMA to male BNC

Oh that's useful information. I have some simple measurements to do at 1.2Ghz, will give it a try.

Try your local computer store. I just bought a pack of 10 from Amazon for less that $& US. *Clyde K. Spencer*

I have this problem also. -- Cheers, Ed Humphries, KT4ED

Hi Herman First of all it is not the mini-VNA it is the DG8SAQ VNWA. Sorry these kind of measurements is only possible with a VNA having 10/12 term error correction facilities. NanoVNA is not able to

No configuring necessary.? Simply key in the frequency. By default it comes up with 900 MHz but you can ask for up to 1.5 GHz and you will get it. Bob

I have read elsewhere than the NANOVNA will operate to1.5 GHz. Is this ture? If so, how do I configure it to do so? -- *Dave - W?LEV* *Just Let Darwin Work* *Just Think*

Please, can you not make the PDF with plots of the NanoVNA, and not the Mini-VNA ?

Not a problem with Windows10 64 bit here.

Hello again GIN&PEZ I would like to continuing following your work, but I think you are expecting much mind reading on my part for me to meet that objective. I am able to infer some information from

Here's a 'free' idea that works. Take an old (2 piece) ball point pen and replace the ink tube, with a small diameter piece of wood, sharpened to a point. Chop stick, wood 'Q tip', (which is what I

My 'stylus' is an old metal drafting pencil, the back side, all metal.? It's perfect. Bob