开云体育

I got a break from TDR by seeing "Swan Lake" , enjoyed the music , not sure about the ballet. My XYL comment was "woman body legs are not attached to the body..." BTW the antenna "mast" fell in recent

Thanks, all reposes are greatly appreciated. 73 Vaclav AA7EJ

The USB-C port on the NanoVNA systems is reported to be rudimentary, and not capable of properly negotiating the voltage it wants. 5 Volts is expected. Use a USB-A to USB-C cable and this won't

Please do not put the text of your post in the Subject line. The Subject line should refer to the general topic about which the post is intended. Some recent posts have had ridiculously long subject

https://photos.app.goo.gl/wKBvKLX6d8kE4AWX8 s?n. 11. juni 2023 kl. 14:27 skrev Oddleiv Tungland <oddleiv@...>:

the display starts to flicker. -Oddleiv

H / H4 / LiteVNA allow install Bluetooth or WiFi to serial module (deivices have internal serial connection pins) for use wireless connect. I test bluetooth HC-05, HC-06 moduless (maximum speed depend

A few years ago, before the nanovna, I bought the MINI60 version of the Sark. It's very small, it sweeps the band you choose, shows the frequency of minimum SWR but you can also read each measurement

https://web.archive.org/web/20061024074651/http://www.eagleaspen.com/products/links/39B2.pdf foam, 82% VF

The wayback machine has it. https://web.archive.org/web/20060822025816/http://www.eagleaspen.com/products/products_1.php?id=51 The 39B2 link below the text leads to a PDF. 73 -Jim NU0C "Anne Ranch"

You might be able to figure it out from the 18 AWG (which is the diameter of the center conductor). The Z depends on the ratio of inner to outer diameter AND the epsilon of the dielectric. OTOH, who's

How long is it? Can you measure how long it is, then use the nano to see how long "Electrically" it is, and there ya go you got it's VF. Joe WB9SBD . A Contest 40 Years in The Making!

It is foam dielectric with VF of 82% Roger

I am not sure I have another scrap cable I can take apart, This one has been given to me and I do not have same crimp connector to cut / restore it.

Is there any way to tell if the dielectric is PE or foam? 73, Joseph W6JHP

I did ask Mts Goggle and got no (real) answer Here is the label on the cable Eagle Aspen 39B2 RG-6 2.25 GHz Digital Coaxial Cable, 6FT, Black, High Performance 2.25 GHz CMX 18AWG 75°C UL E227171

Sigi: Did you write anything up or have pictures of your Bluetooth add-on. I’d like to give it a try. Thanks Ed McCann AG6CX

The open/short/load just makes sure the reflection measurement is correct. It has nothing to do with the actual measurement of a feedline. The reason you can "see" connectors and the antenna in the

The Keysight Ap Note is a good reference. For what it's worth, in the older NanoVNA-Saver version I have, there are some problems in the implementation, specifically because it does not deal with the

Jim Lux, as always, your replies are clearing few of mine misconceptions, thanks. With all this FFT (frequency to pulse and time ) it is still unclear how CHANGING the "sweep" changes the "estimated