开云体育

Many thanks to all. Phil

On the left column there is: Muggs John Ferguson Design 726 Cherry Lane Southampton, PA 18966 Ph – 215-396-7705 Cell – 215-470-7227 Muggs@... http://www.johnfergusondesign.com

On the left of the messages you can select "New Topic".

I would suggest that the TinySA ( a small spectrum analyzer) might be a better way to measure your radiated RF power at a distance. As to accuracy, what you're talking a

How does one start a new topic? I see no link to enable this need below all correspondence. Phil

Fran?ois, I highly appreciate the clarification and feared this would be the case. I recently stumbled across the nanoVNA in another forum. After lightly researching the product through Amazon I

The wiki page Home ( /g/nanovna-users/wiki/12336/177482 ) has been updated by Larry Rothman <nlroth@...>. *Reason:* updated info on DiSlord's modified NanoVNA-App for LiteVNA

In the current firmware there is an option to control the device through the serial port, instead of the usb port. (Menu/Config/Connection/Serial and Serial Speed) I used a Serial/Bluetooth HC-05

With the jet lag, I dare an answer *Yes *No *Measure a power at 100 times the wavelength can be significant but how to calibrate your probe. You can only make comparative measures *It seems to me that

Hello fellow techies, I'm currently in the process of changing a test method for two similar communications antennas. The Tx antennae output 908MHz and 922MHz respectively at ~6.4mW^3. my current test

It's been almost 3 years since the previous posting. Anyone made any progress yet? -- Doug, K8RFT

Other way around. 2 degrees measured in reflection (out and back) is 1 deg one way.

Yes, that technique should work fine. [email protected]> wrote:

Just a quick update. I received several new SA602AD chips just before Thanksgiving. I ordered the "602" because that's what was in there originally. The unit calmed down considerably but still not

Hi Stan, Thank you very much for your very informative and thorough response. I'm finally back at this and would appreciate your thoughts on what I did to achieve phase matching although somewhat

Hello to All, This story points out something that I have been trying to point out for years.? Many of us have been trying to get youngsters to get their tickets and get on the air.? This is

I got into radio at the tender age of four years old, when my dad and I built a crystal set together that he got me for Christmas. I learned a lot about radio then that never left me, and as I grew up

No, I do not know of any circuit board reference that you could use. My 3 year old 2.8 inch model was an early "copy" or clone versioin, with no shielding on the PC boards. it has the 2 terminals to

sparseMatrix, While I agree with your thoughts the level of todays technician licensee is super low. They don’t want to study any more than the question pool and think their license will give them

You guys finally chased me out of my dark lurking corner. The nano VNA is a brilliant tool that can be succinctly described in as little language as it takes to give advice. Same with any VNA really.