Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- Nanovna-Users
- Messages
Search
Re: Upgrading
On Wed, Mar 9, 2022 at 10:49 PM, Colin Coker wrote:
"Thinking about upgrading my very early NanoVNA to a 4" screen version. What is the difference between the H4 and V2? Which one should I go for. " The NanoVNA-H4 has a high-end frequency of 1.5GHz. The V2 family of VNA's have high-end frequencies of 4-6.3GHz. If you only plan on using your VNA below 300MHz, then NanoVNA-H4 has the best performance and lowest costs of the 4" VNA's. The V2+4 and LiteVNA64 are my upgrade choice for use up to 4GHz. The LiteVNA is currently my choice for testing up to 6.3GHz. Overall, I agree with Larry and would choose the LiteVNA if I was upgrading to a 4" VNA for the following reasons: 1. It has a faster processor and more memory which allows it to have up to 1024 display points versus up to 401 display points for the V2. This is on the device itself not from the PC application. 2. It has a micro-SanDisk drive for saving screenshots and S1P/S2P files. 3. The additional memory allows more features to be added to the LiteVNA which makes it more future proof. The current firmware makes use of the additional memory by adding 4 more trace memory storage locations which are very helpful when comparing and documenting different devices. 4. It has a serial interface on-board for adding a wireless connection. This requires the user to buy and install additional components. 5. Display brightness control can be set from the "CONFIG" menu. 6. It has a real-time clock already installed. The time and date can be set from the "EXPERT" menu and are useful for automatically time-date stamping files saved to the SanDisk drive. 7. It has a rudimentary FFT function useful for comparing the magnitude of harmonics if you don't have a specan or scope with FFT on hand. 8. It has a battery level display screen display. 9. I has a floating-point processor unit which some V2's do not. Herb |
Re: Nanovna-H board upgrades
the translator not work on English
toggle quoted message
Show quoted text
*Sent:* Thursday, March 10, 2022 at 4:42 PM *From:* "Costin R" <electronice.az@...> *To:* [email protected] *Subject:* Re: [nanovna-users] Nanovna-H board upgrades Confirm. That translator is not working. I tried several times. I use Chrome where with a right click I have access to the browser's built-in translator. 73! Costin, YO8RCD < > ?n joi, 10 mar. 2022 la 14:54, Cliff <ae5zaham@...> a scris: Gyula, |
Re: Upgrading
Yes,go for the LiteVNA 64 is good, I use? the price is ceep and the firmware is the best.
*Sent:* Thursday, March 10, 2022 at 12:51 PM *From:* "Larry Rothman" <nlroth@...> *To:* [email protected] *Subject:* Re: [nanovna-users] Upgrading Go for the LiteVNA 64 as it is the current design with the most active software development at this time and exceeds 6GHz. Manufacturer's website: US seller: |
Re: Nanovna-H board upgrades
Confirm.
toggle quoted message
Show quoted text
That translator is not working. I tried several times. I use Chrome where with a right click I have access to the browser's built-in translator. 73! Costin, YO8RCD <> ?n joi, 10 mar. 2022 la 14:54, Cliff <ae5zaham@...> a scris: Gyula, |
Re: #general SD card function on H4
#general
Hi Rudy.
I own a H4-clone (hardware version 4.2.1). It came with the soldering pads free and no Transflash connector soldered on it. I provided for by myself. The RTC quartz was missing too and I installed it in the same time of the MicroSD slot. When I try to save a screenshot I obtain the same error like you: Fail write Hi Rudy. I own a H4-clone (hardware version 4.2.1). It came with the soldering pads free and no Transflash connector soldered on it. I provided for by myself. The RTC quartz was missing too and I installed it in the same time of the MicroSD slot. When I try to save a screenshot I obtain the same error like you: Fail write More precisely, the writing of the .BMP file starts but it remains of length 0 and so in the memory card I find the BMP files created but empty. I reformatted the SD card as FAT, FAT32 and exFAT also. That didn't solved. The very strange thing is that I have no problem instead to save S1P, S2P and firmware dump as .bin (about 250kbytes of data). In those cases the data saving goes perfectly. I recently reflashed again last release of DiSlord firmware: 1.1 of 2021/12/11. I lost all my settings and even didn't solved. Firmware bug? 73 Sergio - IK6QRE |
Re: Upgrading
On Thu, Mar 10, 2022 at 05:53 AM, Jim Lux wrote:
1. "Is there a schematic published?" The LiteVNA is not open source so hugen has not released a full schematic. This is not intended to impede users, but rather to slow down the inevitable introduction of LiteVNA clones. If a user wants to make a hardware modification to his LiteVNA, hugen has released a partial schematic to assist him on request. 2. "One issue with some of the later variants on the original NanoVNA is that they are *much* more sensitive to ESD (because they use RF switches on the inputs).? The NanoVNA has resistive pads/bridges and is pretty tolerant to ESD and weird voltages." The LiteVNA uses the same input ESD protection introduced on the tinySA spectrum analyzer that hugen also manufactures. This was pre-emptive addition to ESD harden the input of the LiteVNA. Herb |
website language selection (HA3HZ)
The language selection feature doesn't seem to work on Safari, Chrome, or Firefox (MacOS Big Sur) - I think that something is not causing the translation to work, or it to re-render - If one selects a different language, it shows up as checked the next time, but no translation occurs.
Chrome does bring up a dialog offering Google Translate, which does work. |
Re: Upgrading
On 3/10/22 4:51 AM, Larry Rothman wrote:
Go for the LiteVNA 64 as it is the current design with the most active software development at this time and exceeds 6GHz.Is there a schematic published? One issue with some of the later variants on the original NanoVNA is that they are *much* more sensitive to ESD (because they use RF switches on the inputs).? The NanoVNA has resistive pads/bridges and is pretty tolerant to ESD and weird voltages. |
Re: Nanovna-H board upgrades
Cliff
Gyula,
toggle quoted message
Show quoted text
I selected the English language from the list, but it did not cause the page to translate. As I said I tried 3 different browsers. I'm using MacOS and not Windows so maybe that is the issue. 73, Cliff, AE5ZA On Mar 10, 2022, at 03:57, HA3HZ <gyula@...> wrote: |
Re: Nanovna-H4 / F - Very Large Font Firmware?
That firmware was created 2 years ago by forum member REALD.
There was only a few releases and the H4 had not been released at that point in time. The last release of that firmware was Dec 2019. If you want to contact the author or grab a copy of his source code, his github is: |
Re: What is nanoVNA-D??
Hi Gyula,
Yes, I am using Windows 10. Are you saying that Windows 10 updates disassemble the DfeSeDemo driver?? Does 'disassemble' mean 'make the driver non-functional'?? And are you saying that nanoVNA-App uses this Driver to update the Firmware?? If so, then I think I should be okay ... -- Cheers, Ian Melbourne, Australia |
Re: What is nanoVNA-D??
Hi Ian,
I assume you are using Windows 10 where in my reading, the updates cause an error to disassemble the driver that has previously been installed. Therefore, enter the DFUSE V3.0.6 directory where you can find the necessary drivers in the BIN Library / Driver subdirectory. You will find a folder corresponding to your operating system where you can install the driver again with the EXE file. I hope this was the reason for your failure. -- Gyula HA3HZ |
Re: Nanovna-H board upgrades
In any operating system browser, you will find a menu in the upper left corner where you can set the language. Otherwise, the page uses google translate.
I'm sorry if you didn't figure out how to set your own language. So many people used the website yesterday. I just hope that they were able to set up and not the sons of our country who speak Hungarian and are not torn abroad. -- Gyula HA3HZ |
Re: Upgrading
I am very happy with my H4, and would definitely get it, unless your
toggle quoted message
Show quoted text
primary use case is at frequencies in the GHz range. The V2 plus4 has a purportedly better design for the highest frequencies, and has a top freq of 4GHz, if I remember correctly. But for HF and VHF useband non-critical work at the higher GHz frequencies, I don't see much advantage to the V2. The H4 is an excellent device and has more active firmware support, which has resulted in some excellent features. Stan On Wed, Mar 9, 2022, 10:49 PM Colin Coker <colin@...> wrote:
Thinking about upgrading my very early NanoVNA to a 4" screen version. |
Re: What is nanoVNA-D??
Thanks Gyula, H for Hugen and D for DiSlord .... simple ..... :)
I have connected my nanoVNA to the nanoVNA-App and it is recognized on COM3 etc.. However, when I then put the nanoVNA into DFU mode using the nanoVNA Config Menu ... COM3 shown in top righthand corner of the nanoVNA-App disappears and a message is displayed stating that no DFU device is connected and the Firmware will not upgrade ... see Error message ... "Loading "D:\OneDrive\Electronics\Test Equipment\nanoVNA\nanoVNA software upgrade v1.1.00\NanoVNA.H.v1.1.00.dfu" .. 94825 bytes loaded OK from D:\OneDrive\Electronics\Test Equipment\nanoVNA\nanoVNA software upgrade v1.1.00\NanoVNA.H.v1.1.00.dfu DFU element address [0]: 0x08000000 DFU element size [0]: 94516 Firmware size: 94516 bytes No valid DFU device found Have you put your NanoVNA into DFU mode ?" I checked the Device Manager and "COM3' under "Ports" disappeared (as I believe it should?), but 'Other Devices' appears with "STM32 BOOTLOADER" I believe that this is the file/software used when upgrading firmware via the DfeSeDemo software .... which I have used previously. My knowledge here is very limited .... is this blocking nanoVNA-App form upgrading the Firmware??? Do I need to delete it??? Rename it?? Is it this file .... "DfuSe_Demo_V3.0.6_Setup.exe" ??? Any help is appreciated .... -- Cheers, Ian Melbourne, Australia |
Re: Nanovna-H board upgrades
Cliff
Unfortunately not here. Tried 3 different browsers.
toggle quoted message
Show quoted text
73, Cliff, AE5ZA On Mar 9, 2022, at 12:37, Dave via groups.io <dvfuller@...> wrote: |
to navigate to use esc to dismiss