开云体育

Hi Karl Jan, I'm sorry, but this program can't run on a 64-bit machine? I am running win7-32 and access is denied. If you are only running on a 64-bit machine, you should also indicate it. 73, Gyula

OK for simple SWR? maybe I can skip the calibration part as?a PHASE I add that as PHASE II Whats 5-10% on SWR right? working on a CommandLine byte send recv right now step 0.1 make it talk? !

The calibration code for the NanoVNA

On Thu, Oct 29, 2020 at 04:12 PM, Ed March wrote: Wow ?Thank you 1 of?11 it's already makes sense ! Rather exciting now ! ============================================== One thing you may not find so

I hooked it up to OSX Mojave (10.14) not Catalina... It showed up as a /dev/cu.usbmodem I then just did screen from the command

Would you please tell me how to get those two plots? :-) Thanks! A.

The following files have been uploaded to the Files area of the [email protected] group. * /NanoVNA PC Software/NanoVNA-App.rar ( /g/nanovna-users/files/NanoVNA PC

Meanwhile, I had a look at my board and I found the "0 ohm" resistor might be the only component I can see on the output part - I didn't expect such a resistor could exist. That would mean I can

Wow ?Thank you 1 of?11 it's already makes sense ! Rather exciting now ! *Sent:* Thursday, October 29, 2020 at 4:01 PM *From:* "OneOfEleven" <cmoss296@...> *To:* [email protected]

I designed a 10 7 MHz AM filter and terminated it with the design value of 300 ohms and then with 50 ohms on one side. The response of course changes but the filter works as expected as a BPF. So yes,

The NanoVNA-V2 is not a text serial protocol, it's purely binary .. Go to "Protocol description" here .. https://nanorfe.com/nanovna-v2-user-manual.html#__RefHeading___Toc2539_2953165397 NanoVNA V1's

Hello and great questions I haven't considered all that before in the past when I wrote freeware I just released it as freeware closed source.? You can see some on WB9RAA.com (

I had a look a the corresponding datasheets, so far I found two manufacturers. I attach the one by ECS. The inductor between input and output looks like an extra component required for the operation

Andrea, I think you are correct: Presumably the designer did not want to go to the expense and effort to do a good "L" match, and found that the combination of resistive input matching and no output

I need the firmware. please send to my email thank you Pada tanggal 30 Okt 2020 04:27, "Christian Zietz" <czietz@...> menulis:

What operating systems will be supported? There is no universally accepted definition of freeware, so freeware doesn't tell us anything other than there will be no monetary cost for it. (Maybe.) Will

John, I had downloaded the datasheets, so eventually for the 10.7 MHz filter the value of about 300 ohm for input and output impedance was sure. I was kind of asking for confirmation about the role of

Since 2002 for me. Microsoft sucks.

Nice small tool. Thank you! However, screenshots saved from my NanoVNA H (2.8" version) exhibit a dark blue shadow, for example next to the letters on the left hand side showing the calibration

hi Richard, I know what you mean - they are a 'very' tight fit, but soon loosen up . As some have suggested they only have a limited number of fittings.