开云体育

On Fri, Sep 4, 2020 at 12:40 AM, Hugen wrote: Yes, they use the same PCB manufacturing. From: Ash Date: 2020-09-04 15:35 Subject: Re: Re: [nanovna-users] SAA2N reviews Thanks Hugen. It is SMA, does

Yes, they use the same PCB manufacturing. hugen@... From: Ash Date: 2020-09-04 15:35 To: hugen@... CC: nanovna-users Subject: Re: Re: [nanovna-users] SAA2N reviews Thanks Hugen. It is

Thanks Hugen. It is SMA, does the VNA have the same RF characteristics and performance verification as the N type version?.

Yes, this is Maggie's shop. hugen@... From: Ash Date: 2020-09-04 14:56 To: nanovna-users; hugen Subject: Re: [nanovna-users] SAA2N reviews Hi Hugen, Is this your product?

Hi Hugen, Is this your product? https://aliexpi.com/WNTK

Here is the figure from Carter paper (1932). Piero, I0KPT

Hi Hugen, Is this your product? https://aliexpi.com/WNTK

We are very sorry, there are many countries where we have not found a more suitable logistics solution. This has led to many countries temporarily unable to deliver or need to pay too high logistics

https://app.assetsdes.endeavorb2b.com/e/er?s=1904481191&lid=111270&elqTrackId=4d65cd145105459da62b93ff3d336308&elq=1fdc22ca93bf4b2bbb68486d527adb9b&elqaid=32735&elqat=1&utm_rid=CPG05000005028441&utm_c

Off topic, but posting in case any of the software/firmware gurus on this list might want to contribute. Help is needed with a software version of the DSTAR AMBE encoder/decoder (patent has

Status and enable on the HC05 aren't needed. Only Vcc, Gnd, Rx , and Tx need to be connected. And Rx and Tx are probably labeled from the perspective of the module they are on so probably need to be

#109 : reply to a newcomer = | From: "** ***" <*@gmail.com> | Sent: Thursday, September 03, 2020 08:43 | Subject: Re: S-Parameter Uncertainties in Network Analyzer Measurements = |

"How does a 6 pin module plug into a 4 pin socket?" There are so many possible responses! [ Not "answers" ] - Using a 'hardware multiplexing socket' (still to be developed) - Very carefully - with

Here is the figure from Carter paper (1932). Piero, I0KPT

[email protected]> wrote: I would disagree with that - it would also be ABSOLUTELY correct if the reference impedance was 5000x100=500000 ohms. ?????? But both in amateur radio and

How does a 6 pin module plug into a 4 pin socket? Larry, K4MLA

On 9/2/20 6:19 PM, Jim Lux wrote: > On 9/2/20 4:53 PM, AG6CX wrote: >> The chart of impedance varying with height above ground has been around since at least 1928 or so, first published by Carter in

Sort of.. the sine integral is zeroth order spherical Bessel, the distinction is that the usual ordinary Bessel is based on circular coordinates. So, they're similar, but not the same -see the plot

The chart of impedance varying with height above ground has been around since at least 1928 or so, first published by Carter in IEE Transactions. I’ll post the original paper, with math, when I find

The message was intended for Hugen since Magie does not respond. Yes, I know about other groups, already a member of all of them :)