开云体育

Assuming my interest in nanoVNA is up to 500 Mhz. Can I improve something, say, by adjusting to 200 Mhz? Thank you!

Notes for others... the PayPal method is not shown until you get to step 2 only Estimated Delivery on 10/13 Shipping: US $21.98 AliExpress Standard Shipping is available so you must wait to order if

UUT: a 3meter cable with 50 ohm coax 32 AWG, note the cables terminating connectors are not impedance controlled. Calibration: calibration was completed, short (cap), load (cap), open (cap), through

Display->Flip Display And save settings

How is that accessed, please. I don't recall seeing a menu option...? -- 72/73 de Rich NE1EE On the banks of the Piscataqua

v0142 works here without a beep (H4).

On Sat, Aug 1, 2020 at 12:10 PM, Fred Vos wrote: I dont see support paypal payment ===================================== Fred, Only the AliExpress link supports direct Paypal payment. I just

Firmware allow rotate display

Thinking that I'd prefer the display the other way around for field work...that is, the display is upside down in one of the images where the N fittings are at the top. -- 72/73 de Rich NE1EE On the

On Sat, Aug 1, 2020 at 10:24 AM, Hugen wrote: >I dont see > support paypal payment >

N-type allow 11 GHz Also more durable PS for my work better use N-type connectors, all devices have it, also all my good calibration kits for N-type

Hello all, Thank you Gabriel for sharing this info, the two port VNA is on top of my list with most wanted RF measurement stuff - I will watch you :) -- Regards, Slawek/SP9BSL

As far as I know the SMA connector is better up into the several GHZ range than the N-Type ? But yes the N-Type is GHz good.

0.1.40 looks cool!! :) Stable so far, no beeps - here H4, stock load, win10.

Yes you're right Igor, I've done a temporary rename. I'll separate out the R+jX I think to it's own graph. As is it's a bit cluttered with three curves on one graph, difficult to tell what's what.

Well, I've found a major problem with the comms that would definitely have caused this pausing problem, so I've just fixed that. Now on v0.1.41

A good option. But it was necessary to make a variant with an adapter, since not everyone needs an N-connector and the board itself has little rigidity. Time will tell.

@OneOfEleven: it is my current understanding the "R+jX" graph (I miss) is actually the "Series RLC" one. I would suggest to rename it "R+jX" graph for clarity.. (or add the R+jX" one into the

Hi DiSlord, I must be very lucky, but can have my H4 on for ever, it keeps cool, don't know why, running your latest firmware version 1.03 beta new UI, 192k ADC, Build time Jul 26 2020 -22:32:03,

Version 0.1.40 does not freeze. Works great! Thank! OneOfEleven