¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Nanovna-Users
  2. Messages
Expanded Topics Messages
Date
Re: NanoVNA firmvare, compiled by DiSlord #firmware with MiniSD support #firmware

 

I see you didn't expect an answer from me.
Successful source search. We will be happy to use the product without knowing how it is made.
Re: A nanoVNA amusement

 

I learned half of what electronics is about on my parents' kitchen table ... i had to remove everything to eat !!
The nanovna is a wonderful machine but it can overwhelm a beginner due to its great possibilities.
Greetings for you both.
Javier
Re: NanoVNA firmvare, compiled by DiSlord #firmware with MiniSD support #firmware

 

On Thu, Jun 11, 2020 at 10:26 AM, Gyula Molnar wrote:


Hi Aristarchus,

you can view the previous post the pdf contains the changes and the blue text
link covers it. From there, you can download the file you are looking for.
/g/nanovna-users/message/14220
Did you think of this?

73, Gyula HA3HZ
--
*** If you are not part of the solution, then you are the problem. (
) ***

Hi Gyula,

Of course and seen it.
I'd expect though the usual approach that others do to be taken by DiSlord too.
Since he himself also forked the code from another opensource repository, to place the changes he is doing and distributing, as commits to a repository.
Binary attachments on emails IMHO is the wrong way to do it for many reasons and I guess he already knows it.
I trust he has seen the post, lets hope that he will do the right thing.

73,
Aristarchus
Re: RigExpert's PC software now Supports NanoVNA and is Open Source #consolecommands #measurement #applications

 

A little more understandable if you could.
The starting point of the topic is that nanoVna-H can also be used with this AntScope2.
Many of us claim that it doesn¡¯t work for us.
I can see that so far there has been no open source on githubon to date.
It doesn't work yet, but I should tell gentlemen here about the possibility who can shape it to work with nanovna as well.
Interesting is Visual C ++, that's why I think.
AntScope v1 works for me, I only managed to start v2 once by accident, no more. I was still testing with the EU1KY AA then.
Now that you have entered this info, several of us have tried. Some people proved with a picture that he works for him (in another group). But then why doesn't it work for the others. Okay, I used to write for sure because of VC ++, but I have a newer version, so I didn't install the previous one. This will display a nice white window without info.

--
*** If you are not part of the solution, then you are the problem. ( ) ***
Re: RigExpert's PC software now Supports NanoVNA and is Open Source #consolecommands #measurement #applications

 

To the moderators or group owner,?Perhaps it's time "Dr Dave" stop advertising his title, company and products here,? ?now even nocking other and competitive products here?are just not acceptable.?(For the record, I have no relation or interest in RigExpert, but do own a AA-600.)

-------- Original message --------From: "Dr. David Kirkby, Kirkby Microwave Ltd" <drkirkby@...> Date: 2020/06/11 11:33 (GMT+02:00) To: [email protected] Subject: Re: [nanovna-users] RigExpert's PC software now Supports NanoVNA and is Open Source #applications #consolecommands #measurement On Thu, 11 Jun 2020 at 10:26, Alex RigExpert <support@...> wrote:> Hello everybody!>> My name is Alex, I¡¯m the head of technical support at Rig Expert.. David G8WRB-- Dr. David Kirkby,Kirkby Microwave Ltd,drkirkby@...://www.kirkbymicrowave.co.uk/Telephone 01621-680100./ +44 1621 680100Registered in England & Wales, company number 08914892.Registered office:Stokes Hall Lodge, Burnham Rd, Althorne, Chelmsford, Essex, CM3 6DT, UnitedKingdom
Re: RigExpert's PC software now Supports NanoVNA and is Open Source #consolecommands #measurement #applications

 

And why would you push? your Connector analysis, showing massive 0.003" discrepancy, down our throuts? on this NanoVNA group??(I personally have the AA-600 and it is, a great product)

-------- Original message --------From: "Dr. David Kirkby, Kirkby Microwave Ltd" <drkirkby@...> Date: 2020/06/11 11:33 (GMT+02:00) To: [email protected] Subject: Re: [nanovna-users] RigExpert's PC software now Supports NanoVNA and is Open Source #applications #consolecommands #measurement On Thu, 11 Jun 2020 at 10:26, Alex RigExpert <support@...> wrote:> Hello everybody!>> My name is Alex, I¡¯m the head of technical support at Rig Expert.. David G8WRB-- Dr. David Kirkby,Kirkby Microwave Ltd,drkirkby@...://www.kirkbymicrowave.co.uk/Telephone 01621-680100./ +44 1621 680100Registered in England & Wales, company number 08914892.Registered office:Stokes Hall Lodge, Burnham Rd, Althorne, Chelmsford, Essex, CM3 6DT, UnitedKingdom
Re: RigExpert's PC software now Supports NanoVNA and is Open Source #consolecommands #measurement #applications

 

According to them, the nanovna works on 2.8 ", as its makers said.
For me, Ms VC ++ is installed, when installing AntScope, it rejects the version integrated in the installer and does not install it because it already exists. When I want to run AntScope2, the window is incomplete.
By clicking in the lower left corner I can bring up the "setting" window where I set it to manual, but Connected doesn't have Connect.
Certainly VC ++ is the reason. I have 14.16.27024.1, so I don't install 14.0.24215.
I¡¯ve given up on tackling this program before because it doesn¡¯t know more than the one that works.

Gyula HA3HZ
--
*** If you are not part of the solution, then you are the problem. ( ) ***

Ms VC__ on my OPSystem.png
AntScope2 1.1.1 setup_VC__ not install.png
Click left unten corner.png
AntScope2 Setting window.png

Re: I need help finding a case for the earlier version of the nanoVNA

Gary Lippert
 

There is a vendor on Etsy that has cases for the original nanovna.

Gary, K7VBY
Re: NanoVNA firmvare, compiled by DiSlord #firmware with MiniSD support #firmware

 

Gyula,

Thanks.

Mike N2MS

On June 11, 2020 at 11:43 AM Gyula Molnar <gyula.ha3hz@...> wrote:


Hi Mike,
please check the DiSlord firmware to see if you should upgrade from the current one.
link: /g/nanovna-users/message/14220
73, Gyula HA3HZ

--
*** If you are not part of the solution, then you are the problem. ( ) ***
Re: NanoVNA firmvare, compiled by DiSlord #firmware with MiniSD support #firmware

 

Thanks DiSlord, I missed that one, now the NanoVNA-H4's clock is ticking even when it's off.

Jos


Op 10-6-2020 om 18:09 schreef DiSlord:

On Wed, Jun 10, 2020 at 08:25 AM, Jos Stevens wrote:

Hi DiSlord,

My NanoVNA-H4 with SD-card and 32.768 kHz xtal does not tick when it's
off , do I use the correct firmware ? ? Firmware loaded is : Version
0.9.3.2 beta Fat16/Fat32/ExFAT-SD Card, Build Time: May 31 20230 - 01:33:27.

Thanks,

Jos
For NanoVNA-H4 and installed 32.768 kHz xtal use LSE version from this post
/g/nanovna-users/message/13941

At this moment i try update V2 code, and not found time for update NanoVNA-H and NanoVNA-H4 code for release final version (as i see SD card work perfect)
Re: NanoVNA firmvare, compiled by DiSlord #firmware with MiniSD support #firmware

 

Hi Mike,
please check the DiSlord firmware to see if you should upgrade from the current one.
link: /g/nanovna-users/message/14220
73, Gyula HA3HZ

--
*** If you are not part of the solution, then you are the problem. ( ) ***
Re: RigExpert's PC software now Supports NanoVNA and is Open Source #consolecommands #measurement #applications

 

Alex,

I have a nanoVNA-H model. I verified it is connected to COM12 port and manually set that port in AntScope2 V1.1.1. I tried to connect it but it states "Analyzer Not Connected"

How do I connect to AntScope2?

Mike N2MS

On June 11, 2020 at 5:26 AM Alex RigExpert <support@...> wrote:


Hello everybody!

My name is Alex, I¡¯m the head of technical support at Rig Expert.
I thank you for your attention to our AntScope2 software.
Re: RigExpert's PC software now Supports NanoVNA and is Open Source #consolecommands #measurement #applications

 

Great explanation about the tight tolerance with N type connectors but here is a dumb question. I noticed that some of my connectors do not have the rubber seal/gasket which from what I've read somewhere is there just to help prevent prevent water ingress. If that gasket is missing would that cause possible damage since now the center pin would be "shoved in" further into the female counter part?

73 Vidas
Re: NanoVNA-H and AntScope2 Two part question #applications #firmware

 

H4 is the 4" screen. the H is the smaller (2.8"?) screen

73
Steve
Re: Baud rate

 

Larry,

Thank you for your answer.

One dumb question more from me !

Regards,

Rudi

Le 11.06.2020 ¨¤ 16:34, Larry Rothman a ¨¦crit?:
Ignore baud rate - you're using USB.
Just connect to the port and the USB driver takes care of everything.

On Thursday, June 11, 2020, 10:21:04 a.m. EDT, Rudolf Schaffer <rudolf.schaffer@...> wrote:
...sorry, setbaud is a Tera Term command...
Re: NanoVNA firmvare, compiled by DiSlord #firmware with MiniSD support #firmware

 

I have a NanoVNA H but don't intend to install SD at this time. Does this v0.9.3.3 code have all fixes or enhancements for other features besides SD card support?

Mike N2MS

On June 9, 2020 at 4:09 PM DiSlord <dislordlive@...> wrote:


You can set time by use time command
Filaname VNA_19800101_02850 is 1980 year 01 mounth 01 day 2850 second
See this post /g/nanovna-users/message/13957

You use this? from post /g/nanovna-users/message/13941
NanoVNA H4 v0.9.3.2 beta - SD Card

v0.9.3.3 is only H version at this moment (for H4 i not compile it) in this version i speed up write from 450kb/s up to 850kb/s on good SD cards (remove wait SD card ready write answer after write, wait only on receive write command)
Re: I need help finding a case for the earlier version of the nanoVNA

Jim Parks
 

I printed one with my 3D printer. Lot of examples on Thingiverse.com.

NY0J

-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of fredmoore3@...
Sent: Thursday, June 11, 2020 9:18 AM
To: [email protected]
Subject: [nanovna-users] I need help finding a case for the earlier version of the nanoVNA

Good morning.
Is there someone out here that can point me to a link where I can find cases for the nanoVNA with the smaller display. All I can seem to find now are the cases for the H model

Fred
Re: I need help finding a case for the earlier version of the nanoVNA

 

Thingyverse has a few cases for the older 2.8 inch display units.

On Thursday, June 11, 2020, 10:38:01 a.m. EDT, <fredmoore3@...> wrote:

Good morning.
Is there someone out here that can point me to a link where I can find cases for the nanoVNA with the smaller display.? All I can seem to find now are the cases for the H model

Fred
I need help finding a case for the earlier version of the nanoVNA

 

Good morning.
Is there someone out here that can point me to a link where I can find cases for the nanoVNA with the smaller display. All I can seem to find now are the cases for the H model

Fred
Re: Baud rate

 

Ignore baud rate - you're using USB.
Just connect to the port and the USB driver takes care of everything.

On Thursday, June 11, 2020, 10:21:04 a.m. EDT, Rudolf Schaffer <rudolf.schaffer@...> wrote:

...sorry, setbaud is a Tera Term command...
25661 - 25680 of 39700