开云体育

On Sat, Mar 21, 2020 at 01:02 PM, Nbridgema wrote: All I can say is that worked for me, without a dfu file. ============================================== Quite right. A dfu file is only needed if you

My apologies, re-posting this b/c I didn't know it would show in a different topic... The latest firmware is at https://github.com/ttrftech/NanoVNA/releases/tag/0.7.1 I was hoping to find a .dfu file

https://github.com/ttrftech/NanoVNA/releases/tag/0.7.1 I was hoping to find a .dfu file for Edy555's latest version, because I previously updated NanoVNA-H fw on my Mac that way. (So Terminal already

Thank you very much! wabi

On Sat, Mar 21, 2020 at 08:27 AM, Helmut Wabnig wrote: No way to get the software without goin' through a tedious registration procedure. =========================================== Helmut, From the

Thanks for all the tips. I unscrewed the screws a half turn and it works great now.

Hi Doug, Same problem with OTG interface. I continue....

To use MY NanoVNA with MY Samsung Orbit J3 android phone, I needed this usb otg adapter: (Male) to USB 2.0 (Female) Adapter, On-The-Go (OTG) Convertor Cable, 3-Pack, Black $7.98 (free shipping with

I don't understand why there is this concern when it comes to downloading a program from the manufacturer and maker. In exchange, you only require a simple registration. There is another solution if

Am runnig in circles around the ST software page. No DFUSE there, but lots of CONFUSION. They are sending me a confirmation email, which immediately returns me back to the confirmation email request

On Sat, Mar 21, 2020 at 04:51 AM, Ron WZ1V wrote: Where do we go to download edy555 latest? ========================================================== Ron, see Gyula's earlier reply. NanoVNA user's

Instead of Herb, I reply: by clicking on the blue underlined word in the pdf file you will follow the link from where you can download it. 73, Gyula HA3HZ

Herb: Don't see it in the files section. Where do we go to download edy555 latest?

Hi Luc, This TDR issue is quite interesting, may be beyond the initial topic, hi ! As for many of us we spend currently most of time at home, I have decided to check for TDR what is really provided by

if you are following this path, please also read this description: /g/nanovna-users/files/Hardware%20Mods/NanoVNA%20new%203.2%20LCD%20display%20Herman%20ON1BES.pdf

Hi Robin, The connectors on the LCD may be broken. In another forum, I saw a similar case where the wires broke because the glass was probably not glued to the pcb, so the movement caused a break in

I use iPhone 5s battery (1560mAh), remove protection board from Any 3.5-4mm battery can put in NanoVNA-H case

Hi David, the solution can be found here: /g/nanovna-users/message/11685 73, Gyula HA3HZ

Hi John, It cannot be the same because there are differences in size. Previous edy555 versions and their contact details are in the pdf below. Important: Only available for 2.8 "nanoVNA versions. 73,

Many 50 Ohm loads are made with two 100 Ohm smd resistors in parallel. I've seen many loads fail after intensive use, all the sudden they are 100 Ohm when connected. Unconnected 50 Ohm. We solved it